Canon imageRUNNER Advance 615iF
Parts Replacement. DC Controller PCB
- Backup the Service Mode setting data of DC Controller on the following service mode (Lv.2).
• Service Mode > COPIER > FUNCTION > SYSTEM > DSRAMBUP - Turn OFF the main power switch.
- Restore of the Service Mode data on the following service mode (Lv.2) after replacing the DC Controller PCB.
• Service Mode > COPIER > FUNCTION > SYSTEM > DSRAMRES
NOTE:
If uploading of backup data fails before replacement due to the damage to the DC Controller PCB, enter the service setting values
recorded on the service label or P-PRINT.