Canon imageRUNNER Advance 615iF

Paper Front

Actions after Parts

1. Execute the following service mode to perform automatic adjustment of the reader shading position.
   COPIER > FUNCTION > INSTALL > RDSHDPOS
2. Execute the following service mode to perform the black and white reference level adjustment for the Scanner Unit.
   COPIER > FUNCTION > CCD > CL-AGC
3. Execute the following service mode to perform automatic adjustment of the reading position during DADF reading.
   COPIER > FUNCTION > INSTALL > STRD-POS
4. Follow the steps shown below to adjust the ADF white level.
   1. Place an A4 or LTR size paper on the Copyboard Glass and execute the following service mode.
   COPIER > FUNCTION > CCD > DF-WLVL1
   2. Place an A4 or LTR size paper on the ADF and execute the following service mode.
   COPIER > FUNCTION > CCD > DF-WLVL2
5. n the following service modes, enter the values shown on the label included with the Scanner Unit.
   COPIER > ADJUST > CCD > MTF-xxx
   COPIER > ADJUST > CCD > MTF2-xxx
6. In the following service mode, calculate the MTF filter coefficient.
   COPIER > FUNCTION > CCD > MTF-CLC
7. From the following menu, execute the auto gradation adjustment.
   Settings/Registration > Adjustment > Adjustment/Maintenance > Adjust Image Quality > Auto Adjust Gradation > Full Adjust
8. Write down the following service mode values on the service label for the Reader (on the Front Door of the host machine).
   COPIER > ADJUST > CCD > MTF-xxx
   COPIER > ADJUST > CCD > MTF2-xxx
9. In the following service mode, perform the reading start position adjustment as needed.
   1. Copyboard reading
   COPIER > ADJUST > ADJ-XY > ADJ-X
   COPIER > ADJUST > ADJ-XY > ADJ-Y
   2. ADF stream reading
   COPIER > ADJUST > ADJ-XY > ADJ-S
   COPIER > ADJUST > ADJ-XY > ADJ-Y-DF
   COPIER > ADJUST > ADJ-XY > ADJY-DF2

Paper Back

Actions after Parts

1. Execute the following service mode to adjust the Scanner Unit white level.
   COPIER > FUNCTION > CCD > CL-AGC
2. Follow the steps shown below to adjust the ADF white level.
   1. Place an A4 or LTR size paper on the Copyboard Glass and execute the following service mode.
   COPIER > FUNCTION > CCD > DF-WLVL1
   2. Place an A4 or LTR size paper on the ADF and execute the following service mode.
   COPIER > FUNCTION > CCD > DF-WLVL2
3. Follow the steps shown below to perform the paper back shading correction.
   1. Cleaning the reading side 1
   Locations for cleaning: Stream Reading Glass for front side, Stream Reading Glass for back side
   Cleaning method: Clean with the light-blue cloth stored in the Reader Assembly.
   2. Paper back shading correction 1
   Close the ADF, and execute the following service mode.
   COPIER > FUNCTION > CCD > BK-SHD1
   3. Paper back shading correction 2
   Place the White Plate included with the package by aligning it with the jumping platform, close the ADF, and execute the following service mode.
   COPIER > FUNCTION > CCD > BK-SHD2
   4. Cleaning the reading side 2
   Remove the White Plate and perform the cleaning again.
   Locations for cleaning: Stream Reading Glass for front side, Stream Reading Glass for back side
   Cleaning method: Clean with the light-blue cloth stored in the Reader Assembly.
   5. Paper back shading correction 3
   Close the ADF, and execute the following service mode.
   COPIER > FUNCTION > CCD > BK-SHD3
4. In the following service modes, enter the values shown on the label included with the Scanner Unit.
   COPIER > ADJUST > CCD > MTF3-xxx
5. Execute the following service mode to calculate the MTF filter coefficient.
   COPIER > FUNCTION > CCD > MTF-CLC
6. In the following menu, execute the auto gradation adjustment.
   Settings/Registration > Adjustment > Adjustment/Maintenance > Adjust Image Quality > Auto Adjust Gradation > Full Adjust
7. Write down the following service mode values on the service label for the Reader (on the Front Door of the host machine).
   COPIER > ADJUST > CCD > MTF3-xxx
8. Execute the following service modes to adjust the reading start position as needed.
   COPIER > ADJUST > ADJ-XY > ADJ-S: Adjustment of the Reader shading position
   COPIER > ADJUST > ADJ-XY > ADJ-Y-DF: Adjustment of the reading start position (DADF, front side, horizontal scanning direction)
   COPIER > ADJUST > ADJ-XY > ADJY-DF2: Adjustment of the reading start position (DADF, back side, horizontal scanning direction)