Canon imageRUNNER Advance 4545i III

After setting the following service mode, press the Start key and output a test print (2-sided print) from each of the paper sources.
COPIER > TEST > PG >
TYPE = 5
PG-PICK = each paper source

Hardware Adjustment

Hardware adjustment is not performed for Cassettes 1 and 2.

Software Adjustment

Use the following service mode to make an adjustment.

1. Left edge margin
   COPIER > ADJUST > MISC >

   Service mode item	Description of adjustment
   C1-ADJ-Y	Cassette 1
   C2-ADJ-Y	Cassette 2
   C3-ADJ-Y	Cassette 3
   C4-ADJ-Y	Cassette 4

   As the input value is changed by 1, the margin on the left edge of paper is changed by 0.1 mm.
2. Leading edge margin
   There is no service mode setting for adjusting the leading edge margin.
3. If the service mode setting value has been changed, write down the new adjustment value on the service label.
   <Reference: Standard value>
   Left edge: 2.5 +/- 1.5 mm