Canon imageRUNNER Advance 4525i III
Adjustment. Image Position
After setting the following service mode, press the Start key and output a test print (2-sided print) from each of the paper sources.
COPIER > TEST > PG >
TYPE = 5
PG-PICK = each paper source
Hardware Adjustment
Hardware adjustment is not performed for Cassettes 1 and 2.
Software Adjustment
Use the following service mode to make an adjustment.
- Left edge margin
COPIER > ADJUST > MISC >Service mode item Description of adjustment C1-ADJ-Y Cassette 1 C2-ADJ-Y Cassette 2 C3-ADJ-Y Cassette 3 C4-ADJ-Y Cassette 4 - Leading edge margin
There is no service mode setting for adjusting the leading edge margin. - If the service mode setting value has been changed, write down the new adjustment value on the service label.
<Reference: Standard value>
Left edge: 2.5 +/- 1.5 mm