Canon imageRUNNER Advance 4025
Troubleshooting. Jam Code. Paper Deck Unit-B2, DADF-AG1
Paper Deck Unit-B2
| ACC ID | Jam Code | Type | Sensor ID | Sensor Name/Description |
|---|---|---|---|---|
| 00 | 010F | DELAY | PS6D | Deck pickup sensor |
| 00 | 020F | STNRY | PS6D | Deck pickup sensor |
| 00 | 0A0F | POWER ON | PS6D | Deck pickup sensor |
*1: The state is recovered by opening and closing the Door, or turning OFF and then ON the power supply. If it is not recovered by the above operation, it is considered an error near the target sensor. Disconnect and then connect the connectors around the target sensor, check if the cable is open circuit, and replace the sensor.
DADF-AG1
| ACC ID | Jam Code | Type | Sensor ID | Sensor Name/Description |
|---|---|---|---|---|
| 01 | 0003 | DELAY | SR1 | Registration sensor |
| 01 | 0004 | STNRY | SR1 | Registration sensor |
| 01 | 0005 | DELAY | SR1,SR2 | Registration sensor/Read sensor |
| 01 | 0006 | STNRY | SR2 | Read sensor |
| 01 | 0007 | DELAY | SR2,SR3 | Registration sensor/Delivery reversal sensor |
| 01 | 0008 | STNRY | SR3 | Delivery reversal sensor |
| 01 | 0044 | STNRY | SR1 | Registration sensor |
| 01 | 0045 | DELAY | SR1,SR2 | Registration sensor/Read sensor |
| 01 | 0046 | STNRY | SR2 | Read sensor |
| 01 | 0047 | DELAY | SR2,SR3 | Registration sensor/Delivery reversal sensor |
| 01 | 0048 | STNRY | SR3 | Delivery reversal sensor |
| 01 | 0071 | TIMING NG | - | Timing NG jam |
| 01 | 0073 | HP NG | SR11 | Release motor HP sensor |
| 01 | 0084 | STNRY | SR1 | Registration sensor |
| 01 | 0090 | ADF OP | ADF OP | ADF open jam |
| 01 | 0091 | ADF OP | ADF OP | ADF open jam |
| 01 | 0092 | COVER OP | SR6 | Cover open/closed sensor |
| 01 | 0093 | COVER OP | SR6 | Cover open/closed sensor |
| 01 | 0094 | RESIDUAL | SR1,SR2,SR3 | Registration sensor/Read sensor/Delivery reversal sensor |
| 01 | 0095 | PICKUP NG | - | Pickup NG jam |