Canon imageCLASS MF7480
Service Mode. 03 SSW, MENU
| #SSSW | ||
|---|---|---|
| No. | Initial setting | Function |
| SW01 | 00000000 | error/copy control |
| SW02 | not used | |
| SW03 | 00000000 | echo remedy setting |
| SW04 | 10000000 | communication fault remedy setting |
| SW05 | 00000000 | standard function (DIS signal) setting |
| SW06 - SW11 | not used | |
| SW12 | 00000010 | page timer setting |
| SW13 | 00000000 | meter/inch resolution setting |
| SW14 | 00000001 | inch/meter resolution setting |
| No. | Initial setting | Function |
| SW15 - SW24 | not used | |
| SW25 | 00000000 | report indication resolution setting |
| SW26 - SW27 | not used | |
| SW28 | 00000000 | V.8/V.34 protocol settings |
| SW29 | not used | |
| SW30 | 00000000(JPN)/ 00000011(EURO)/ 00000001(Other country/region) |
Assigning a New Dial Tone Detection Method |
| SW31- SW32 | not used | |
| SW33 | 00000000 | counter function settings |
| SW34 | 10000000 | waste toner full display setting |
| SW35 - SW50 | not used | |
| #MENU | |||
|---|---|---|---|
| No. | Initial setting | Range of setting | Function |
| 01: - 04: | not used | ||
| 05: | 0 | ON/OFF | NL equalizer setting |
| 06: | 0 | 0: DIAL 1: SERVICEMAN [1] 2: SERVICEMAN [2] 3: OFF |
line monitor setting |
| 07: | 10 | 0-15 | transmission level setting |
| 08: | 0 | 0: 3429 1: 3200 2: 3000 3: 2800 4: 2743 5: 2400 |
V.34 baud rate |
| 09: | 0 | 0: 33.6kbs 1: 31.2kbs 2: 28.8kbs 3: 26.4kbs 4: 24.0kbs 5: 21.6kbs 6: 19.2kbs 7: 16.8kbs 8: 14.4kbs 9: 12.0kbs 10: 9.6kbs 11: 7.2kbs 12: 4.8kbs 13: 2.4kbs |
V.34 transmission speed |
| 10: | 1 | 0: 50Hz 1: 25Hz 2: 17Hz |
pseudo CI signal frequency setting |
| 11: - 20: | not used | ||