Canon imageCLASS MF4750

CLEAR

COPIER>FUNCTION>CLEAR
Sub item	Description	Common to all models	Network model and FAX model only
TEL-USER	Clear the user data and the registered address data. SSSW is not cleared. When this service mode is executed, a message "REBOOTING..." is displayed on the Control Panel, and the host machine is automatically restarted.	Yes
SRVC-DAT	SERVICE DATA is cleared. User data is not cleared.	Yes
HIST	Each log data is cleared. ACT-HIST: Communication log is cleared. ACT-HIST: Each print log is cleared.	Yes
PWD-CLEAR	Password of the system administrator is cleared.		Yes
ALL	The following data are cleared. USER DATA SERVICE DATA JOB ID Each log CLEAR DATE USER DATA/ SERVICE DATA are reset to the default location value. Appropriate values for LOCAL / SIZE-LC needs to be preset before executing of CLEAR -> ALL When this service mode is executed without setting the appropriate values for LOCAL / SIZE-LC, factory default settings are continued to use. When this service mode is executed, a message "REBOOTING..." is displayed on the Control Panel, and the host machine is automatically restarted.	Yes

MISC-R

COPIER>FUNCTION>MISC-R
Sub item	Description
SCANLAMP	Execution of lighting function for Scanning Lamp.

MISC-P

OUTPUT

When outputting the report, place paper in the Pickup Cassette, and remove paper from the Multi-purpose Tray.
If paper is placed in the Multi-purpose Tray, the report is not output even if paper is placed in the Pickup Cassette.

COPIER>FUNCTION>MISC-P
Sub item	Description
SRVC-DAT	To output the system data list/ system dump list as follows;
SYS-DAT	To output the system data list. Service software switches and parameters used in FAX function are mainly outputted.
SYS-DMP	To output the system dump list. Service data such as the number of communications, the number of receiving pages and sending pages, and the number of error are outputted.
CNTR	To output the counter report. Counter values of use trend for reading, storage, communications, and copy are displayed.
SPEC	To output the spec report. Current device status is printed out.

SYSTEM

COPIER>FUNCTION>SYSTEM
Sub item	Description
DOWNLOAD	To switch to the download mode.

PARAM

COPIER>FUNCTION>PARAM
Sub item	Description
EXC-NAVI	To switch of installation navigation. Setting value 0: Enable (Default) 1: Disable Set this switch to 1 after the termination of installation navigation. Installation navigation is not executed when this switch is 1 at next start-up. When this service mode is executed, a message "REBOOTING..." is displayed on the Control Panel, and the host machine is automatically restarted.

SPLMAN

COPIER>FUNCTION>SPLMAN
Sub item	Description	Common to all models	Double sided printing model only
TOP-MPT	Adjustment of leading edge margin when feeding from MP tray. Adjustment in: 0.1mm Setting range: 50 ~ 150 (Default value: 104)	Yes
TOP-DUP-MPT	Adjustment of leading edge margin on both sides/ back side when feeding from MP tray. Adjustment in: 0.1mm Setting range: 50 ~ 150 (Default value: 104)		Yes
LEFT-MPT	Adjustment of left margin when feeding from MP tray. Adjustment in: 0.1mm Setting range: 50 ~ 150 (Default value: 97)	Yes
LEFT-DUP-MPT	Adjustment of left margin on both sides/ back side when feeding from MP tray. Adjustment in: 0.1mm Setting range: 50 ~ 150 (Default value: 96)		Yes
TOP-CST	Adjustment of leading edge margin when feeding from cassette. Adjustment in: 0.1mm Setting range: 50 ~ 150 (Default value: 104)	Yes
TOP-DUP-CST	Adjustment of leading edge margin on both sides/ back side when feeding from cassette. Adjustment in: 0.1mm Setting range: 50 ~ 150 (Default value: 104)		Yes
LEFT-CST	Adjustment of left margin when feeding from cassette. Adjustment in: 0.1mm Setting range: 50 ~ 150 (Default value: 97)	Yes
LEFT-DUP-CST	Adjustment of left margin on both sides/ back side when feeding from cassette. Adjustment in: 0.1mm Setting range: 50 ~ 150 (Default value: 96)		Yes