Canon imageCLASS MF4430
Service Mode. COPIER. FUNCTION
CLEAR
COPIER>FUNCTION>CLEAR | |||
---|---|---|---|
Sub item | Description | Common to all models | Network model and FAX model only |
TEL-USER | Clear the user data and the registered address data. SSSW is not cleared. When this service mode is executed, a message "REBOOTING..." is displayed on the Control Panel, and the host machine is automatically restarted. |
Yes | |
SRVC-DAT | SERVICE DATA is cleared. User data is not cleared. | Yes | |
HIST | Each log data is cleared. ACT-HIST: Communication log is cleared. ACT-HIST: Each print log is cleared. |
Yes | |
PWD-CLEAR | Password of the system administrator is cleared. | Yes | |
ALL | The following data are cleared.
Appropriate values for LOCAL / SIZE-LC needs to be preset before executing of CLEAR -> ALL When this service mode is executed without setting the appropriate values for LOCAL / SIZE-LC, factory default settings are continued to use. When this service mode is executed, a message "REBOOTING..." is displayed on the Control Panel, and the host machine is automatically restarted. |
Yes |
MISC-R
COPIER>FUNCTION>MISC-R | |
---|---|
Sub item | Description |
SCANLAMP | Execution of lighting function for Scanning Lamp. |
MISC-P
OUTPUT
When outputting the report, place paper in the Pickup Cassette, and remove paper from the Multi-purpose Tray.
If paper is placed in the Multi-purpose Tray, the report is not output even if paper is placed in the Pickup Cassette.
COPIER>FUNCTION>MISC-P | |
---|---|
Sub item | Description |
SRVC-DAT | To output the system data list/ system dump list as follows; |
SYS-DAT | To output the system data list. Service software switches and parameters used in FAX function are mainly outputted. |
SYS-DMP | To output the system dump list. Service data such as the number of communications, the number of receiving pages and sending pages, and the number of error are outputted. |
CNTR | To output the counter report. Counter values of use trend for reading, storage, communications, and copy are displayed. |
SPEC | To output the spec report. Current device status is printed out. |
SYSTEM
COPIER>FUNCTION>SYSTEM | |
---|---|
Sub item | Description |
DOWNLOAD | To switch to the download mode. |
PARAM
COPIER>FUNCTION>PARAM | |
---|---|
Sub item | Description |
EXC-NAVI | To switch of installation navigation. Setting value 0: Enable (Default) 1: Disable Set this switch to 1 after the termination of installation navigation. Installation navigation is not executed when this switch is 1 at next start-up. When this service mode is executed, a message "REBOOTING..." is displayed on the Control Panel, and the host machine is automatically restarted. |
SPLMAN
COPIER>FUNCTION>SPLMAN | |||
---|---|---|---|
Sub item | Description | Common to all models | Double sided printing model only |
TOP-MPT | Adjustment of leading edge margin when feeding from MP tray. Adjustment in: 0.1mm Setting range: 50 ~ 150 (Default value: 104) |
Yes | |
TOP-DUP-MPT | Adjustment of leading edge margin on both sides/ back side when feeding from MP tray. Adjustment in: 0.1mm Setting range: 50 ~ 150 (Default value: 104) |
Yes | |
LEFT-MPT | Adjustment of left margin when feeding from MP tray. Adjustment in: 0.1mm Setting range: 50 ~ 150 (Default value: 97) |
Yes | |
LEFT-DUP-MPT | Adjustment of left margin on both sides/ back side when feeding from MP tray. Adjustment in: 0.1mm Setting range: 50 ~ 150 (Default value: 96) |
Yes | |
TOP-CST | Adjustment of leading edge margin when feeding from cassette. Adjustment in: 0.1mm Setting range: 50 ~ 150 (Default value: 104) |
Yes | |
TOP-DUP-CST | Adjustment of leading edge margin on both sides/ back side when feeding from cassette. Adjustment in: 0.1mm Setting range: 50 ~ 150 (Default value: 104) |
Yes | |
LEFT-CST | Adjustment of left margin when feeding from cassette. Adjustment in: 0.1mm Setting range: 50 ~ 150 (Default value: 97) |
Yes | |
LEFT-DUP-CST | Adjustment of left margin on both sides/ back side when feeding from cassette. Adjustment in: 0.1mm Setting range: 50 ~ 150 (Default value: 96) |
Yes |