Canon imageCLASS D520
Service Mode. TESTMODE. FAX, NETWORK
FAX
MODEM
| TESTMODE>FAX>MODEM | ||
|---|---|---|
| Sub item | Description | FAX model only |
| FREQ | Transmit selected frequency in closed DC circuit using tone generation function of modem. [Setting values] 462Hz 1100Hz 1300Hz 1500Hz 1650Hz 1850Hz 2100Hz |
Yes |
| G3TX | Transmit selected signal pattern in closed DC circuit at selected frequency using G3 signal transmission function of modem. [Setting values] 300bps 2400bps 4800bps 7200bps 9800bps TC7200 TC9600 12000bp 14400bp |
Yes |
| DTMFTX(LONG) | Transmit DTMF signal using DTMF transmission function of modem after DC circuit closure. | Yes |
| V34G3TX | Transmit selected frequency using G3 signal transmission function (V.34) after DC circuit closure. [Setting values] SPEED 3429baud 3200baud 3000baud 2800baud 2743baud 2400baud |
Yes |
RELAY-1
| TESTMODE>FAX>MODEM>RELAY-1 | ||
|---|---|---|
| Sub item | Description | FAX model only |
| CML | Test ON/OFF of port SW and relay on NCU Setting value: ON, OFF | Yes |
| H | Test ON/OFF of port SW and relay on NCU Setting value: ON, OFF | Yes |
FACULTY
| TESTMODE>FAX>FACULTY | ||
|---|---|---|
| Sub item | Description | FAX model only |
| G34800TX | Transmit the frequency of 4800bps using G3 signal transmission function after DC circuit closure. | Yes |
| DETECT1 | Ring detection Check the status (ON, OFF) of hook and Ci, Fc from i line. |
Yes |
| DETECT2 | CNG detection test 1 Execute CNG signal check and FED check. Detect CNG after CML relay is ON. |
Yes |
| DETECT3 | CNG detection test 2 Execute CNG signal check and FED check. Detect CNG after CML relay is OFF. |
Yes |
PANEL
| TESTMODE>FAX>PANEL | |
|---|---|
| Sub item | Description |
| KEY CHECK START | Key check [Applicable case] Check if all keys functions normally after replacement of Control Panel. |
| LED CHECK START | LED check [Applicable case] Check if all LEDs are lit normally after replacement of Control Panel. |
| LCD CHECK START | LCD check [Applicable case] Check if LCD can display without any missing dot after replacement of Control Pannel. |
NETWORK
SSSW
| NETWORK>SSSW | ||
|---|---|---|
| Sub item | BIT | Description |
| SW01 ~ SW09 | 0 | Not in use |
| 1 | ||
| 2 | ||
| 3 | ||
| 4 | ||
| 5 | ||
| 6 | ||
| 7 | ||
| SW10 Network Config System |
0 | Not in use |
| 1 | ||
| 2 | ||
| 3 | Turn ON(Enable)/ OFF(Disable) for acquisition of host name (Option 12) by DHCP Default value: 0 |
|
| 4 | Turn ON(Enable)/ OFF(Disable) for registration of host name (Option 81) by DHCP Default value: 1 |
|
| 5 | Not in use | |
| 6 | ||
| 7 | ||
| SW11 ~ SW50 | 0 | Not in use |
| 1 | ||
| 2 | ||
| 3 | ||
| 4 | ||
| 5 | ||
| 6 | ||
| 7 | ||