Canon iR1643P
Adjustment. Replacing the Main Controller PCB
Before Replacing the Main Controller PCB
The following setting values are recorded in the Main Controller PCB. When the Main Controller PCB is replaced, these setting values are all returned to the default unless they are restored.
- User mode setting values
- Service mode setting values
These setting values can be restored by performing backup by either of the following methods: Refer to the Backup List for the details of items that are backed up.“Backup Data”
- Backup/restoration using the Expansion ROM for servicing and the Sublog Board (Recommended)“Backup/restoration using the Expansion ROM for servicing and the Sublog Board”
- SERVICE MODE > FUNCTION GR. > ECONF > EXPORT
- SERVICE MODE > FUNCTION GR. > Import/Export Set. > EXPORT
- Setup > User Maintenance > Import/Export Set. > EXPORT
- RUI > Settings/Registration > Management Settings > Import/Export > Export
CAUTION:
Perform backup immediately before replacing the Main Controller PCB.
After Replacing the Main Controller PCB
Restore the data in the same way as that of backup. Refer to the Backup List for the details of items that are restored.“Backup Data”
- Backup/restoration using the Expansion ROM for servicing and the Sublog Board (Recommended)“Backup/restoration using the Expansion ROM for servicing and the Sublog Board”
- SERVICE MODE > FUNCTION GR. > ECONF > IMPORT
- SERVICE MODE > FUNCTION GR. > Import/Export Set. > IMPORT
- Setup > User Maintenance > Import/Export Set. > IMPORT
- RUI > Settings/Registration > Management Settings > Import/Export > Import
Update firmware as necessary
CAUTION:
Be sure to restore the data after replacing the Main Controller PCB.