-
Catalog
-
Sign In
-
Contacts
-
Forum
-
Eng
Canon iR1430
Adjustment. Actions when Replacing the CIS Unit 1
Automatic Gain Offset Adjustment for the CIS unit
- Rewrite "1000" for the setting value on following service mode.
• COPIER >ADJUST > CCD > LED-BW-R, BW-G, BW-B = 1000
- Rewrite "1100" for the setting value on following service mode.
• COPIER >ADJUST > CCD > LED-CL-R, CL-G, CL-B = 1100
- Press "OK" for each on following service mode.
• COPIER > FUNCTION > CCD > CL-AGC, BW-AGC
- After the automatic adjustment, "executing" disappears.
- Check the setting value is changed. When it is not changed, readjust from procedure 1) to 4).
Adjustment of Image Reading Start Position
- Enter "-20" for the setting value on following service mode.
• COPIER > ADJUST > ADJ-XY > STRD-POS = -20
- Select following service mode. • COPIER > FUNCTION > INSTALL > STRD-POS
- Press OK key and then the automatic adjustment is executed. After the automatic adjustment, "executing" disappears.
- Check the setting value is changed. When it is not changed, readjust from procedure 1) to 3).