Canon iR1020

Operation at the time of Bit SW

1. Selecting Service Mode Press the Additionalfunctions key, 2key, 8key, Additional functions key sequentially.
   #SSSW
2. Press [OK] on the touch panel.
   #SSSW
   001 000000000
3. Selecting a Menu Item Press [OK].
   #SSSW
   033 000000000
4. Selecting a Bit Switch Select the bit using the [left arrow]/[right arrow] on the touch panel.
5. Registering/Setting Data Enter data using the keypad, and press the [OK].
6. Press the [Stop]/[Additional functions]/[Reset] key to end the service mode.

Operation at the time of Parameter

1. Selecting Service Mode Press the Additionalfunctions key, 2key, 8key, Additional functions key sequentially.
   #SSSW
2. Selecting a Menu Item Select the Menu item using the [left arrow]/[right arrow] on the touch panel.
   #NUMERIC Param.
3. Press [OK].
   #NUMERIC Param.
   001 0
4. Selecting a Prarameter Select the Prarameter using the [left arrow]/[right arrow].
   #NUMERIC Param.
   002 0
5. Registering/Setting Data Enter data using the keypad, and then press [OK].
   # 3 NUMERIC Param.
   002 10
6. Press the [Stop]/[Additional functions]/[Reset] key to end the service mode.