Canon iR Advance C2030i
Troubleshooting. Jam Code. Main Unit
Main Unit
ACC ID | Jam Code | Type | Sensor Name | Sensor ID |
---|---|---|---|---|
00 | 0102 | Delay | Cassette 2 Vertical Path Sensor | PS17 |
00 | 0103 | Delay | Cassette 3 Vertical Path Sensor | PS108 |
00 | 0104 | Delay | Cassette 4 Vertical Path Sensor | PS109 |
00 | 0105 | Delay | Registration Sensor | PS20 |
00 | 010A | Delay | First Delivery Sensor | PS21 |
00 | 010B | Delay | Second Delivery Sensor | PS27 |
00 | 010C | Delay | Third Delivery Sensor | PS30 |
00 | 010D | Delay | Reverse Sensor | PS29 |
00 | 010E | Delay | Duplex Sensor | PS31 |
00 | 0205 | Stationary | Registration Sensor | PS20 |
00 | 020A | Stationary | First Delivery Sensor | PS21 |
00 | 020B | Stationary | Second Delivery Sensor | PS27 |
00 | 020C | Stationary | Third Delivery Sensor | PS30 |
00 | 070A | Wrap | First Delivery Sensor | PS21 |
00 | 0A02 | Power ON | Cassette 2 Vertical Path Sensor | PS17 |
00 | 0A03 | Power ON | Cassette 3 Vertical Path Sensor | PS108 |
00 | 0A04 | Power ON | Cassette 4 Vertical Path Sensor | PS109 |
00 | 0A05 | Power ON | Registration Sensor | PS20 |
00 | 0A08 | Power ON | Arch Sensor 1 | PS22 |
00 | 0A09 | Power ON | Arch Sensor 2 | PS23 |
00 | 0A0A | Power ON | First Delivery Sensor | PS21 |
00 | 0A0B | Power ON | Second Delivery Sensor | PS27 |
00 | 0A0C | Power ON | Third Delivery Sensor | PS30 |
00 | 0A0D | Power ON | Reverse Sensor | PS29 |
00 | 0A0E | Power ON | Duplex Sensor | PS31 |
00 | 0B00 | Door Open | Front Cover Sensor | PS41 |
00 | 0B01 | Door Open | Right Door Sensor | PS41 |
00 | 0CA1 | Error *1 | - | - |
00 | 0CA2 | Sequence *2 | - | - |
00 | 0CA3 | Sequence *2 | - | - |
00 | 0CF1 | Retry Error*1 | - | - |
00 | 0D91 | Size Error | Registration Sensor | PS20 |
00 | 0D92 | Media Error | - | - |
00 | 0D93 | Media Error | - | - |
00 | 0D94 | Size Error | Registration Sensor | PS20 |
*1 The state is recovered by opening and closing the Door, or turning OFF and then ON the power supply. If the same jam is detected regardless of the operation above, the error code is displayed.
*2: The state is recovered by opening and closing the Door, or turning OFF and then ON the power supply.If it is not recovered by the above operation, it is considered an error near the target sensor.Disconnect and then connect the connectors around the target sensor, check if the cable is open circuit, and replace the sensor.