Canon iR Advance 715iF III

Cassette Left Edge Margin Adjustment (1st Side)

CAUTION:
• Check the left edge margin with TYPE=5, black halftone.
• When printing duplicate copies, 1st side is printed to the front of paper and 2nd side is printed to the back of paper.

Copy from the cassette, and check that the left edge margin (L1) is within 2.5 +/- 1.5mm (for LTR/LGL: 4.2 +/- 1.5 mm). When it is out of the specified range, perform the following procedure.

1. Change the left edge margin (L1) for the 1st side of paper in the following service mode.
   • Service mode > COPIER > ADJUST > FEED-ADJ > ADJ-C1
   When the value is increased by 1, the left edge margin (L1) is increased by 0.1 mm (the image moves to the right).
2. Copy from the cassette, and check that the left edge margin (L1) is within 2.5mm +/- 1.5mm (for LTR/LGL: 4.2 +/- 1.5 mm).
3. Write the adjusted value on the service label.
   • ADJ-C1

Cassette Left Edge Margin Adjustment (2nd Side)

CAUTION:
• Check the left edge margin with TYPE=5, black halftone.
• When printing duplicate copies, 1st side is printed to the front of paper and 2nd side is printed to the back of paper.

Copy from the cassette, and check that the left edge margin (L1) is within 2.5 +/- 2.0mm (for LTR/LGL: 4.2 +/- 2.0mm). When it is out of the specified range, perform the following procedure.

1. Change the left edge margin (L1) for the 2nd side of paper in the following service mode.
   • Service mode > COPIER > ADJUST > FEED-ADJ > ADJ-C1RE
   When the value is increased by 1, the left edge margin (L1) is increased by 0.1mm (the image moves to the right).
2. Copy from the cassette, and check that the left edge margin (L1) is within 2.5mm +/- 2.0mm (for LTR/LGL: 4.2 +/- 2.0mm).
3. Write the adjusted value on the service label.
   • ADJ-C1RE

Leading Edge Margin Adjustment (1st Side)

CAUTION:
• Check the left edge margin with TYPE=5, black halftone.
• When printing duplicate copies, 1st side is printed to the front of paper and 2nd side is printed to the back of paper.

Copy from the cassette, and check that the left edge margin (L1) is within 4.0 +/- 2.0mm. When it is out of the specified range, perform the following procedure.

1. Change the left edge margin (L1) for the 1st side of the paper in the following service mode.
   • Service mode > COPIER > ADJUST > FEED-ADJ > REGIST
   When the value is increased by 1, the left edge margin (L1) is increased by 0.1mm (the image moves to the right).
2. Copy from the cassette, and check that the left edge margin (L1) is within 4.0 +/- 2.0mm.
3. Write the adjusted value on the service label.
   • REGIST

Leading Edge Margin Adjustment (2nd Side)

CAUTION:
• Check the left edge margin with TYPE=5, black halftone.
• When printing duplicate copies, 1st side is printed to the front of paper and 2nd side is printed to the back of paper.

Copy from the cassette, and check that the left edge margin (L1) is within 4.0 +/- 2.0mm. When it is out of the specified range, perform the following procedure.

1. Change the left edge margin (L1) for the 2nd side of the paper in the following service mode.
   • Service mode > COPIER > ADJUST > FEED-ADJ > REG-DUP1
   When the value is increased by 1, the left edge margin (L1) is increased by 0.1mm (the image moves to the right).
2. Copy from the cassette, and check that the left edge margin (L1) is within 4.0 +/- 2.0mm.
3. Write the adjusted value on the service label. • REG-DUP1