Canon iR Advance 4025A
Troubleshooting. Alarm Code 1
| Alarm Code | Title | A. movement /B. cause /C. measures | ||
|---|---|---|---|---|
| 00 | - | 0085 | A notice of state | - |
| 00 | - | 0246 | Error code display (4-digit) | Soft counter PCB cannot write normally |
| 00 | - | 0247 | Error code display (4-digit) | Soft counter PCB cannot restore data |
| 04 | - | 0008 | Paper Deck Lifter error | Movement: The Paper Deck Main Motor (M1D) stops. CAUSE: The Deck Lifter does not rise or the Deck Lifter Position Sensor (PS4D) is failure. Measure: Turn OFF/ON the power swtch to release the error. |
| 04 | - | 0011 | Cassette 1 Paper Feed Retry error | Movement: No change. CAUSE: The paper does not picked up even if the paper feed retry operation is carried out 4 times. MEASURE: Check the pick-up/paper feed/separation rollers. -> Check whether a scrap of paper remains around the paper feed area or not. |
| 04 | - | 0012 | Cassette 2 Paper Feed Retry error | Movement: No change. CAUSE: The paper does not picked up even if the paper feed retry operation is carried out 4 times. MEASURE: Check the pick-up/paper feed/separation rollers. -> Check whether a scrap of paper remains around the paper feed area or not. |
| 04 | - | 0013 | Cassette 3 Paper Feed Retry error | Movement: No change. CAUSE: The paper does not picked up even if the paper feed retry operation is carried out 4 times. MEASURE: Check the pick-up/paper feed/separation rollers. -> Check whether a scrap of paper remains around the paper feed area or not. |
| 04 | - | 0014 | Cassette 4 Paper Feed Retry error | Movement: No change. CAUSE: The paper does not picked up even if the paper feed retry operation is carried out 4 times. MEASURE: Check the pick-up/paper feed/separation rollers. -> Check whether a scrap of paper remains around the paper feed area or not. |
| 04 | - | 0017 | Manual Feeder Paper Feed Retry error | Movement: No change. CAUSE: The paper does not picked up even if the paper feed retry operation is carried out 4 times. MEASURE: Check the paper feed roller and the separation pad. -> Check whether a scrap of paper remains around the paper feed area or not. |
| 04 | - | 0018 | Paper Deck Retry error | Movement: No change. CAUSE: The paper does not picked up even if the paper feed retry operation is carried out 4 times. MEASURE: Check the pick-up/paper feed/separation rollers. -> Check whether a scrap of paper remains around the paper feed area or not. |
| 10 | - | 0020 | Toner (Bk) prior delivery alarm | Movement: No change. CAUSE: The remaining quantity of the toner became the specific level or less. MEASURE: Replace the toner bottle. |
| 10 | - | 0100 | Toner bottle replacement completion alarm | The replacement of the Toner bottle was detected. |
| 11 | - | 0001 | Waste Toner Container full | Movement: A message "The waste toner container is full." is displayed on the Control Panel, and the machine is stopped. Cause: The Waste Toner Container becomes full. Measures: Clean the Waste Toner Container. |
| 11 | - | 0010 | Waste Toner Container prior delivery alarm | Movement: A message is displayed on the Control Panel. (Continuous printing is enabled.) Cause: Display of Waste Toner Container preparation alarm Measures: Clean the Waste Toner Container. |
| 31 | - | 0005 | Environment Sensor reading alarm | Movement: It becomes as follow: environment temperature= 0 degC, environment humidity= 0%. Cause: Connection of the Environment Sensor cannot be detected. Measures:
|
| 31 | - | 0008 | HDD failure prediction alarm | Movement: HDD failure is expected to occur in a short time due to occurrence of physical error in HDD. It does not occur in the HDD of mirroring configuration. Cause: Error in the S.M.A.R.T. value of HDD Measures:
nitored. |