Canon i-SENSYS MF913w
Service Mode. COPIER. ADJUST
ADJ-XY
COPIER (Service mode for printer) > ADJUST (Adjustment mode) > ADJ-XY
ADJ-X For R&D use
STRD-POS For R&D use
COPIER (Service mode for printer) > ADJUST (Adjustment mode) > ADJ-XY
ADJ-X-MG For R&D use
CCD
COPIER (Service mode for printer) > ADJUST (Adjustment mode) > CCD
W-PLT-X For R&D use
W-PLT-Y For R&D use
W-PLT-Z For R&D use
FBTAR-R Shading target VL (R) entry
Detail
To enter the shading target value of Red of the Scanner Unit at Reader Copyboard. When replacing the Main Controller PCB/clearing RAM data, enter the value of service label. When replacing the Reader Unit, CIS Unit, or Reader Upper Cover Unit, execute DF-WLVL1 and DF-WLVL2 and write the value which is automatically set in the service label.
Use Case
- When replacing the Main Controller PCB/clearing RAM data
- When replacing the Reader Unit
- When replacing the CIS Unit
- When replacing the Reader Upper Cover Unit
Adj/Set/Operate Method: Select the item, and then press OK key.
Display/Adj/Set Range: 128 to 384
FBTAR-G Shading target VL (G) entry
Detail
To enter the shading target value of Green of the Scanner Unit at Reader Copyboard. When replacing the Main Controller PCB/clearing RAM data, enter the value of service label. When replacing the Reader Unit, CIS Unit, or Reader Upper Cover Unit, execute DF-WLVL1 and DF-WLVL2 and write the value which is automatically set in the service label.
Use Case
- When replacing the Main Controller PCB/clearing RAM data
- When replacing the Reader Unit
- When replacing the CIS Unit
- When replacing the Reader Upper Cover Unit
Adj/Set/Operate Method Select the item, and then press OK key.
Display/Adj/Set Range 128 to 384
FBTAR-B Shading target VL (B) entry
Detail
To enter the shading target value of Blue of the Scanner Unit at Reader Copyboard. When replacing the Main Controller PCB/clearing RAM data, enter the value of service label. When replacing the Reader Unit, CIS Unit, or Reader Upper Cover Unit, execute DF-WLVL1 and DF-WLVL2 and write the value which is automatically set in the service label.
Use Case
- When replacing the Main Controller PCB/clearing RAM data
- When replacing the Reader Unit
- When replacing the CIS Unit
- When replacing the Reader Upper Cover Unit
Adj/Set/Operate Method Select the item, and then press OK key.
Display/Adj/Set Range 128 to 384
FBTAR-BW Shading target VL (BW) entry
Detail
To enter the shading target value of B&W of the Scanner Unit at stream reading. When replacing the Main Controller PCB/clearing RAM data, enter the value of service label. When replacing the Reader Unit, CIS Unit, or Reader Upper Cover Unit, execute DF-WLVL1 and DF-WLVL2 and write the value which is automatically set in the service label.
Use Case
- When replacing the Main Controller PCB/clearing RAM data
- When replacing the Reader Unit
- When replacing the CIS Unit
- When replacing the Reader Upper Cover Unit
Adj/Set/Operate Method Select the item, and then press OK key.
Display/Adj/Set Range 128 to 384
COPIER (Service mode for printer) > ADJUST (Adjustment mode) > CCD
DFTAR-R For R&D use
DFTAR-G For R&D use
DFTAR-B For R&D use
DFTAR-BW For R&D use
PANEL
COPIER (Service mode for printer) > ADJUST (Adjustment mode) > PANEL
TOUCHCHK For R&D use