Canon i-SENSYS MF912

Engine Test Print

This machine has an engine test print function to check whether the printer engine is operating normally.

NOTE:
In the case of engine test print, a test print can be performed by using only the Engine Controller.

1. Load A4/LTR paper in the Multi-purpose Tray.
2. Open/close the Cartridge Door 4 times or more within 5 seconds.
3. An engine test print is executed, and the test pattern as shown below is printed.

Service Mode Menu

• COPIER
  Service mode for copier
  • DISPLAY
    State display mode
  • I/O
    I/O display mode
  • ADJUST
    Adjustment mode
  • FUNCTION
    Operation / inspection mode
  • OPTION
    Specification setting mode
  • COUNTER
    Counter mode
• FEEDER
  ADF service mode
  • ADJUST
    Adjustment mode
  • FUNCTION
    Operation / inspection mode
• FAX
  FAX service mode
  • SSSW
    Bit switch registration mode
  • MENU
    Menu switch registration mode
  • NUM
    Numeric parameter setting mode
  • NCU
    NCU parameter setting mode (Service adjustment is not available.
• TESTMODE
  Service mode for test print, operation check, etc.
  • SYSTEM
    System test mode
  • SCAN
    Scan test mode
  • FAX
    FAX test mode
  • PANEL
    Touch panel test mode
• NET WORK
  Net work test mode