Canon i-SENSYS MF6595cx
Service Mode. COUNTER
This copier is furnished with a maintenance/supplies counter set (DRBL-1), which can be used to gain rough measures of when to replace supplies. The counter set increments by one on counting each sheet of small-sized paper (up to A4/LTR) and by two on counting each sheet of large-sized paper (larger than A4/LTR).
Maintenance counter list | ||
---|---|---|
Item | Counter | Explanation |
TOTAL (Total counter) | SERVICE1 | Service total counter 1 |
SERVICE2 | Service total counter 2 | |
TTL | Total counter | |
COPY | Total copy counter | |
PDL-PRT | PDL print counter | |
FAX-PRT | Fax print counter | |
REP-PRT | Report print counter | |
2-SIDE | Double-sided copy/print counter | |
SCAN | Scan counter | |
PICK-UP (Paper pickup counter) | C1 | Cassette 1 jam counter |
C2 | Cassette 2 jam counter | |
C3 | Cassette 3 jam counter | |
C4 | Cassette 4 jam counter | |
MF | Manual feed tray pickup total counter | |
2-SIDE | Double-sided paper pickup total counter | |
FEEDER (Feeder related counters) | FEED | Feeder pickup total counter |
DFOP-CNT | ADF open/close hinge counter | |
JAM (Jam counters) | TTL | Unit total jam count |
FEEDER | Feeder total jam count | |
SORTER | Finisher total jam count | |
2-SIDE | Duplex unit jam counter | |
MF | Manual feed tray jam counter | |
C1 | Cassette 1 jam counter | |
C2 | Cassette 2 jam counter | |
C3 | Cassette 3 jam counter | |
C4 | Cassette 4 jam counter | |
MISC (Other required counter) | WST-TNR | Not used |
Parts counter list | |||
---|---|---|---|
Item | Counter | Explanation | Service life |
DRBL-1 (Unit supplies) | FX-UNIT | Fixing unit paper pass count | 150,000 |
TR-ROLL | Transfer charger roller high-voltage ON count | 150,000 | |
DV-UNT-C | Developing unit rotation count | 150,000 | |
M-PU-RL | Manual feed tray pickup roller paper pass count | 150,000 | |
M-SP-PD | Manual feed tray separation pad paper pass count | 150,000 |
Clearing Counters
- Maintenance/parts counter all clear
Execute service mode > CLEAR > COUNTER to clear all maintenance/parts counters. - Counter clear on parts replacement
Press the numeric keypad key 0 after displaying the counter for a part just replaced, and the counter will be cleared individually.