Canon i-SENSYS MF645Cx

Logs such as history of cartridge replacement are output as a report. There are two types of cartridge log reports; one for users and one for service technicians.

CAUTION:
Do not provide users with the cartridge log report for service technicians because it contains detailed information that is
not disclosed to end users.

No.	Description
[1]	Replacement logs
[2]	Cartridge type
[3]	The number of times a non-genuine cartridge has been detected
[4]	Non-genuine cartridge page count

NOTE:
In addition to output as a report, cartridge logs can also be displayed on the remote UI service mode screen (for service technicians)
or remote UI screen (for users).

• To display cartridge logs (for service technicians):
  SERVICE REPORT > CRG-LOG
• To display cartridge logs (for users)*:
  Status Monitor/Cancel > Cartridge Log
• When not displaying the cartridge log to users, set the following service mode to "0" (OFF).
  ON/OFF of [Cartridge Log] display:
  COPIER > OPTION > DSPLY-SW > CRG-LOG

Output method

Execute the following service mode to output a cartridge log report for service technicians.

• To output a report on cartridge replacement history:
  COPIER > FUNCTION > MISC-P > CRG-LOG

NOTE:
• To output a cartridge log report (for users)*:
Menu > Output Reports > Print List > Cartridge Log Report
* : When not allowing users to output the cartridge log report, set the following service mode to "0" (OFF).
• ON/OFF of [Cartridge Log Report] display:
COPIER > OPTION > DSPLY-SW > CRG-LOG

Replacement logs

The record of replacement and usage of cartridges will be printed.

CAUTION:
Just after the cartridge has been replaced with a genuine cartridge or when a non-genuine cartridge is used, accurate
information cannot be obtained and a random or approximate value may be printed.

Item	Description	Remarks
(1) Serial No.	Serial number of the cartridge
(2) Type	Cartridge type	C1 : Genuine C2 to C8 : Non-genuine C0 : Unknown
(3) Cpcty.	Cartridge capacity	Displayed in accordance with the toner fillup amount
(4/6) First/Last Used	The date and time it was installed/last used
(S1/S5) Pg. Count *	Cartridge page count (when it was installed/last used)	00000000 to 99999999
(5/7) Left	The amount remaining in the cartridge (when it was instal- led/last used)	0 to 100% New: 100%, Non-genuine: -)
(S2/S6) Toner *	The remaining life of the toner (when it was installed/last used)	-128 to 100% (New: 100%, Indefinite: -%)
(S3/S7) Drum *	The remaining life of the drum (when it was installed/last used)	-128 to 100% (New: 100%, Indefinite: -%)
(S4/S8) Parts *	The remaining life of the Developing Assembly (when it was installed/last used)	-128 to 100% (New: 100%, Indefinite: -%)

* : S1 to S8 are printed only on reports for service technicians.

Number of detections of non-genuine cartridge / Page count of non-genuine cartridge

When a non-genuine cartridge is installed, it is classified as a cartridge type C2 to C9 according to the reason for judging it nongenuine, and the number of detections of each type and the number of pages printed with the cartridge installed are recorded.

NOTE:
The number of detections of non-genuine cartridge and the page count of non-genuine cartridge can be reset.
• To clear the cartridge replacement log:
COPIER > FUNCTION > CLEAR > CRGL-CNT