Canon i-SENSYS MF418x
Service Mode. COPIER. DISPLAY
VERSION
COPIER > DISPLAY > VERSION
| MAIN | Display of MAIN (main program) version |
|---|---|
| Detail | To display the firmware version of Main Controller PCB. |
| Use Case | When upgrading the firmware |
| Adj/Set/Operate Method | N/A (Display only) |
| Display/Adj/Set Range | 00.00 to 99.99 |
| BOOT | Boot ROM version |
| Detail | To display the version of Boot ROM (BOOT program). |
| Use Case | When upgrading the firmware |
| Adj/Set/Operate Method | N/A (Display only) |
| Display/Adj/Set Range | 00.01 to 99.99 |
| LANG | Language pack version |
| Detail | To display the version of language pack. |
| Use Case | When upgrading the firmware |
| Adj/Set/Operate Method | N/A (Display only) |
| Display/Adj/Set Range | 00.00 to 99.99 |
| DEMODATA | Demo print data version |
| Detail | To display the version of demo print data. Since this machine does not have demo print function, "FF.FF"is displayed. |
| Use Case | When upgrading the firmware |
| Adj/Set/Operate Method | N/A (Display only) |
| Display/Adj/Set Range | 00.01 to 99.99 |
| ECONT | ECONT version |
| Detail | To display the version of Engine Controller PCB. |
| Use Case | When upgrading the firmware |
| Adj/Set/Operate Method | N/A (Display only) |
| Display/Adj/Set Range | 00.01 to 99.99 |
| PANEL | Dspl of Control Panel CPU PCB ROM ver |
| Detail | To display the ROM version of Control Panel CPU PCB. |
| Use Case | When upgrading the firmware |
| Adj/Set/Operate Method | N/A (Display only) |
| Display/Adj/Set Range | 00.00 to 99.99 |
| Related Service Mode | COPIER > FUNCTION > SYSTEM > PANEL-UP |
USER
COPIER > DISPLAY > USER
| SPDTYPE | To display the engine speed type (ppm) of Controller Board. |
|---|---|
| Detail | To display the engine speed type (ppm) of Controller Board. |
| Use Case | When checking the engine speed type |
| Adj/Set/Operate Method | None (display only) |
| Display/Adj/Set Range | 00 to 99 |
CCD
COPIER > DISPLAY > CCD
| TARGET-B | Shading target value (B) |
|---|---|
| Detail | To display the shading target value of Blue. Continuous display of 0 (minimum) or 2048 (maximum) is considered a failure of the CIS Unit. |
| Use Case | At scanned image failure |
| Adj/Set/Operate Method Display/Adj/Set Range Default Value | N/A (Display only) 0 to 2048 1202 |
| Related Service Mode | COPIER > ADJUST > CCD > DFTAR-B |
| TARGET-G | Shading target value (G) |
| Detail | To display the shading target value of Green. Continuous display of 0 (minimum) or 2048 (maximum) is considered a failure of the CIS Unit. |
| Use Case | At scanned image failure |
| Adj/Set/Operate Method Display/Adj/Set Range Default Value | N/A (Display only) 0 to 2048 1163 |
| Related Service Mode | COPIER > ADJUST > CCD > DFTAR-G |
| TARGET-R | Shading target value (R) |
| Detail | To display the shading target value of Red. Continuous display of 0 (minimum) or 2048 (maximum) is considered a failure of the CIS Unit. |
| Use Case | At scanned image failure |
| Adj/Set/Operate Method Display/Adj/Set Range Default Value | N/A (Display only) 0 to 2048 1135 |
| Related Service Mode | COPIER > ADJUST > CCD > DFTAR-R |
| TARGETBW | Shading target value (BW) |
| Detail | To display the shading target value at B&W jobs. Continuous display of 0 (minimum) or 2048 (maximum) is considered a failure of the Main Controller PCB. |
| Use Case | At scanned image failure |
| Adj/Set/Operate Method Display/Adj/Set Range Default Value | N/A (Display only) 0 to 2048 1072 |
| Related Service Mode | COPIER > ADJUST > CCD > DFTAR-BW |
ERR
Error code display screen
Up to 20 E codes and detailed codes for system errors can be shown.
JAM
Jam code display screen
Up to 20 Jam codes and detailed codes for system errors can be shown.