Canon i-SENSYS MF4018

Outline of test mode

The static test mode can be operated according to the menu item displayed on the display

Print test

The test pattern is printed in the print area.

H/W TEST

The function of the sensor and the operation panel can test.

Test mode menu

To operate the test mode

1. Push the additional functions key and # key to enter SERVICE MODE.
2. Select FUNCTION or H/W TEST by the cursor button, and push the OK button.

Stoppbotaning is pushed when coming off the test mode.

FUNCTION → PRINT TEST PATTERN → CONT. PRINTING

H/W TEST

SIGNAL TEST
RELAY TEST
SENSOR TEST
DIAL TEST
VOLUME TEST
KEY TEST
AGING
CIS TEST
BOOK SCAN TEST
COPY TEST
JPN PSUDO RING
ADF SCAN TEST
IR SCAN TEST

Print test pattern

From the FUNCTION menu, select PRINT TEST PATTERN.
In this test, the printer unit will be used to print various patterns. For service work, be sure to use the BLACK pattern and the SQUARE pattern. Use the BLACK print pattern to meke sure that the printout is free of white lines and unevenness; on the other hand, use the SQUARE printout to make sure that the printout is free of image contraction, elongation, and soiling.

Sensor test

SENSOR TEST is selected from the H/W TEST menu. In this test, the state of each sensor of this machine can be checked on the display. For the sensor that uses the sensor arm and the microswitch, the output of the sensor can be confirmed by moving them by the hand.

HOOK1 TEST
HOOK2 TEST
ADF DS TEST
ADF DES TEST
CRG TEST
TN VALUE
RING DETECT
CNG DETECT(AnsMode)
CNG DETECT(FAX/TEL)