Canon i-SENSYS MF267dw
Service Mode. COPIER. DISPLAY
DISPLAY (State display mode)
COPIER (Service mode for printer) > DISPLAY (State display mode)
ERR: Display error log
Detail: To display the error log (max. 20 items).
Adj/Set/Operate Method: N/A (Display only)
JAM: Display jam log
Detail: To display the jam logs of the printer and ADF scanner (max. 20 items).
Display/Adj/Set Range: N/A (Display only)
VERSION
COPIER (Service mode for printer) > DISPLAY (State display mode) > VERSION
MAIN: Display Main Controller Version
Detail: To display the main controller version.
Use Case: When upgrading the firmware.
Adj/Set/Operate Method: N/A (Display only)
Display/Adj/Set Range: 00.00 to 99.99
BOOT: Display BOOT ROM version
Detail: To display the version of boot ROM.
Use Case: When upgrading the firmware.
Adj/Set/Operate Method: N/A (Display only)
Display/Adj/Set Range: 00.00 to 99.99
LANG: Display Language pack version
Detail: To display the version of Language pack.
Use Case: When upgrading the firmware.
Adj/Set/Operate Method: N/A (Display only)
Display/Adj/Set Range: 00.00 to 99.99
ECONT: Display Engine Controller version
Detail: To display the version of the engine controller.
Use Case: When upgrading the firmware.
Adj/Set/Operate Method: N/A (Display only)
Display/Adj/Set Range: 00.00 to 99.99
CCD
COPIER (Service mode for printer) > DISPLAY (State display mode) > CCD
FB-TARGET-B: Display shading target value (B)
Detail: To display the shading target value of BLUE at copyboard reading.
Use Case: At scanned image failure
Adj/Set/Operate Method: N/A (Display only)
Display/Adj/Set Range: 128 to 384
Related Service Mode: COPIER > ADJUST > CCD > FBTAR-B
COPIER (Service mode for printer) > DISPLAY (State display mode)
COPIER (Service mode for printer) > DISPLAY (State display mode) > CCD
FB-TARGET-G: Display shading target value (G)
Detail: To display the shading target value of GREEN at copyboard reading.
Use Case: At scanned image failure
Adj/Set/Operate Method: N/A (Display only)
Display/Adj/Set Range: 128 to 384
Related Service Mode: COPIER > ADJUST > CCD > FBTAR-G
FB-TARGET-R: Display shading target value (R)
Detail: To display the shading target value of RED at copyboard reading.
Use Case: At scanned image failure
Adj/Set/Operate Method: N/A (Display only)
Display/Adj/Set Range: 128 to 384
Related Service Mode: COPIER > ADJUST > CCD > FBTAR-R
FB-TARGET-BW: Display shading target value (B&W)
Detail: To display the shading target value of B&W at copyboard reading.
Use Case: At scanned image failure
Adj/Set/Operate Method: N/A (Display only)
Display/Adj/Set Range: 128 to 384
Related Service Mode: COPIER > ADJUST > CCD > FBTAR-BW
DF-TARGET-B: Display shading target value (B): ADF
Detail: To display the shading target value of BLUE at ADF stream reading.
Use Case: At scanned image failure
Adj/Set/Operate Method: N/A (Display only)
Display/Adj/Set Range: 128 to 384
Related Service Mode: COPIER > ADJUST > CCD > DFTAR-B
Supplement/Memo: ADF model only
DF-TARGET-G: Display shading target value (G): ADF
Detail: To display the shading target value of GREEN at ADF stream reading.
Use Case: At scanned image failure
Adj/Set/Operate Method: N/A (Display only)
Display/Adj/Set Range: 128 to 384
Related Service Mode: COPIER > ADJUST > CCD > DFTAR-G
Supplement/Memo: ADF model only
DF-TARGET-R: Display shading target value (R): ADF
Detail: To display the shading target value of RED at ADF stream reading.
Use Case: At scanned image failure
Adj/Set/Operate Method: N/A (Display only)
Display/Adj/Set Range: 128 to 384
Related Service Mode: COPIER > ADJUST > CCD > DFTAR-R
Supplement/Memo: ADF model only
DF-TARGET-BW: Display shading target value (B&W): ADF
Detail: To display the shading target value of B&W at ADF stream reading.
Use Case: At scanned image failure
Adj/Set/Operate Method: N/A (Display only)
Display/Adj/Set Range: 128 to 384
Related Service Mode: COPIER > ADJUST > CCD > DFTAR-BW
Supplement/Memo: ADF model only