Canon i-SENSYS MF267dw

Overview

Although the nip width of the Fixing Assembly cannot be adjusted with this machine, it can be checked. By checking the nip width when fixing failure occurs, it is possible to judge whether there is a problem with the Fixing Assembly.

Field Remedy

Check the nip width of the Fixing Assembly by the following procedure.

1. Print a solid black image on a A4/LTR size paper using the cartridge same as that used with this machine and bring it to the customer site.
2. Load the solid black printed paper with its printed side facing down on the Pickup Tray of the machine.
3. Execute the engine test print.
4. When the leading edge of the printed paper comes out from the delivery outlet, turn OFF the power.
5. Open the Cartridge Door approx. 60 seconds after the power is turned OFF, and pull out the printed paper from the machine.
6. Measure the widths of the glossy part of the toner on the printed paper, and check that they are within the range as follows.
   • Center (a): 5.8 ± 0.8 mm
   • Edge (b) and (c): 5.8 ± 0.8 mm each