Canon i-SENSYS MF249dw

CLEAR

COPIER > FUNCTION > CLEAR
Sub item	Item	Description	FAX model	Other
TEL-USER		Clear the user data and the registered address data. SSSW is not cleared. When this service mode is executed, a message "REBOOTING..." is displayed on the Control Panel, and the host machine is automatically restarted.	Yes	Yes
SRVC-DAT		SERVICE DATA is cleared. User data is not cleared.	Yes	Yes
HIST	ACT-HIST	Communication log is cleared.	Yes	No
	ACC-HIST	Each print log is cleared.	Yes	Yes
	JAM-HIST	JAM log is cleared.	Yes	Yes
	ERR-HIST	Error(E code) log is cleared.	Yes	Yes
PWD-CLEAR		Password of the system administrator is cleared.	Yes	Yes
ALL		The following data are cleared. USER DATA SERVICE DATA JOB ID Each log CLEAR DATE KEY LOG DATA USER DATA/ SERVICE DATA are reset to the default location value. Appropriate values for LOCAL / SIZE-LC needs to be preset before executing of CLEAR -> ALL When this service mode is executed with- out setting the appropriate values for LOCAL / SIZE-LC, factory default settings are continued to use. When this service mode is executed, a message "REBOOTING..." is displayed on the Control Panel, and the host machine is automatically restarted.	Yes	Yes

MISC-R

COPIER > FUNCTION > MISC-R
Sub item	Description	Common to all models
SCANLAMP	Execution of lighting function for Scanning Lamp. (CIS LED R -> G -> B -> W -> OFF)	Yes

MISC-P

OUTPUT

When outputting the report, place paper in the Pickup Cassette, and remove paper from the Multi-purpose Tray.
If paper is placed in the Multi-purpose Tray, the report is not output even if paper is placed in the Pickup Cassette.

COPIER > FUNCTION > MISC-P
Sub item	Description	FAX model	Other
SRVC-DAT	To output the system data list/ system dump list as follows;	Yes	No
SYS-DAT	To output the system data list. Service software switches and parameters used in FAX function are mainly out- putted.	Yes	No
SYS-DMP	To output the system dump list. Service data such as the number of communications, the number of receiving pages and sending pages, and the number of error are outputted.	Yes	No
CNTR	To output the counter report. Counter values of use trend for reading, storage, communications, and copy are displayed.	Yes	Yes
SPEC	To output the spec report. Current device status is printed out.	Yes	Yes
KEY-HIST	Output of the key log report To output the key log up to the time the transmission task was input (the [START] key was pressed).	Yes	No