Canon i-SENSYS MF227dw
Service Mode. TESTMODE. FAX, PANEL
FAX
MODEM
| TESTMODE > FAX > MODEM | |||
|---|---|---|---|
| Sub item | Description | FAX model |
Other model |
| RELAY-1 | Test ON/OFF of port SW and relay on NCU Setting value: ON, OFF | Yes | No |
| FREQ | Transmit selected frequency in closed DC circuit using tone generation function of modem. [Setting values] 462Hz, 1100Hz, 1300Hz, 1500Hz, 1650Hz, 1850Hz, 2100Hz |
Yes | No |
| G3TX | Transmit selected signal pattern in closed DC circuit at selected frequency using G3 signal transmission function of modem. [Setting values] 300bps, 2400bps, 4800bps, 7200bps, 9600bps, TC7200, TC9600, 12000bp, 14400bp |
Yes | No |
| DTMFTX | Transmit DTMF signal using DTMF transmission function of modem after DC circuit closure. | Yes | No |
| V34G3TX | Transmit selected frequency using G3 signal transmission function (V.34) after DC circuit closure. [Setting values] SPEED : 2400bps*, 3429baud, 3200baud, 3000baud, 2800baud, 2743baud, 2400baud *: 2400bps, 4800bps, 7200bps, 9600bps, 12000bps, 14400bps, 16800bps, 19200bps, 21600bps, 24000bps, 26400bps, 28800bps, 31200bps, 33600bps |
Yes | No |
FACULTY
| TESTMODE > FAX > FACULTY | |||
|---|---|---|---|
| Sub item | Description | FAX model | Other model |
| G34800TX | Transmit the frequency of 4800bps using G3 signal transmission function after DC circuit closure. | Yes | No |
| DETECT1 | Ring detection Check the status (ON, OFF) of hook and Ci, Fc from i line. |
Yes | No |
| DETECT2 | CNG detection test 1 Execute CNG signal check and FED check. Detect CNG after CML relay is ON. |
Yes | No |
| DETECT3 | CNG detection test 2 Execute CNG signal check and FED check. Detect CNG after CML relay is OFF. |
Yes | No |
PANEL
| TESTMODE > FAX > PANEL | ||
|---|---|---|
| Sub item | Description | Common to all models |
| KEY CHECK START | Key check [Applicable case] Check if all keys functions normally after replacement of Control Panel. |
Yes |
| LED CHECK START | LED check [Applicable case] Check if all LEDs are lit normally after replacement of Control Panel. |
Yes |
| LCD CHECK START | LCD check [Applicable case] Check if LCD can display without any missing dot after replacement of Control Panel. |
Yes |
| TOUCH CHECK START | Touch Panel check [Use case] To check if the Touch Panel can be used when replacing the Control Panel |
Yes |