PrintCopy.info service

Canon i-SENSYS MF227dw

 All About this machine
Table Of Contents 

Service Mode. COPIER. OPTION

BODY

COPIER > OPTION > BODY
Sub item Description ADF
model		 Other
LOCALE

To set country group.
1: Japan
2: North America
3: Korea
4: China
5: Taiwan
6: Europe
7: Asia
8: Oceania
Setting range: 1 - 8 (Default value: Factory default)

Execute the following service mode to enable this setting.
COPIER > FUNCTION > CLEAR > ALL

 Yes Yes
ASLPMAX To change the maximum value of the auto sleep time. Setting range: 30 or 240 (Default value: 30) Yes Yes

ACC

COPIER > OPTION > ACC
Sub item Description Common to all models
WLAN Shows whether the Wireless LAN function is ON/OFF.
0: Forcibly turned OFF (The function is disabled even if the wireless LAN is installed.)
1: ON (default value)		 Yes
WLANMODE Shows whether the Wireless LAN IEEE 802.11n standard is enabled/disabled.
0: Disabled
1: Enabled (Default value)		 Yes
WLANSERIAL Use this setting to use the serial interface exclusively for the WiFi function. Use this setting to take various measurement of Wireless LAN.
0: Normal mode(Default value) 1: Measurement mode		 Yes

SERIAL

COPIER > OPTION > SERIAL
Sub item Description Common to all models
SN-MAIN

SN-MAIN Enter the device serial number written on the rating name plate of the host machine.

<Input procedure>

  1. Write down the value in the "Location" field (blank by default) of System Management Settings from remote UI or local UI. -> In the field, the Controller PCB is replaced with a service part.
  2. Enter the serial number in "Location" of the system management settings, and confirm the serial number. [Menu] > [System Management Settings] > [Device Information Settings] > [Location]
  3. Temporarily enter the serial number in "Location" (8 alphanumeric characters).
  4. Execute this service mode. Check that OK is displayed in COPIER > OPTION > SERIAL > SN-MAIN. After execution, turn OFF and then ON the power. Perform output only when the entered serial number is 8 alphanumeric characters. After output, the serial number entered in "Location" will be deleted.
  5. After turning ON the power, check the serial number on the system management data list.
  6. Change the setting of "Location" back to the original value. (Enter the value you wrote down in step 1.)
 Yes
Error Code
Service Mode, Troubleshooting
Parts Catalog
Compatibility
Downloads Files
Home
New Register Forgot Password?
Send message to us