Canon MF9330C
Service Mode. COPIER. FUNCTION 1 INSTALL
INSTALL
COPIER > FUNCTION > INSTALL | |
---|---|
Sub item | Description |
CARD | Not used |
E-RDS | Enabling/disabling of the e-RDS function Setting value: 0: Disabled, 1: Enabled [Factory setting value/Value after RAM clearing: 0] |
RGW-PORT | Setting of the port number of the sales company's server used for E-RDS Refer to the port number in the user mode. Setting range: 1 to 65535 [Factory setting value/Value after RAM clearing: 443] |
COM-TEST | Confirmation of the connection with the sales company's server used for E-RDS Try to connect the sales company's server. Make a judgment of whether connection has been made or not, and display the result by OK or NG. |
COM-LOG | Display of a communication error log Display the detailed result of communication test with the sales company's server used for E-RDS. When an error occurs in communication with the sales company's server, error information is displayed. <Log contents> Number: No. 1 is assigned to the latest one. Error code: 8-digit hexadecimal number Date: Date when the error occurred Time: Time when the error occurred Detailed error information: 128 characters maximum 5 logs maximum |
RGW-ADR | Setting of the URL of the sales company's server used for E-RDS Set the URL of the sales company's server. Setting value: URL (incl. NULL, SJIS is not supported) (128 characters maximum) |
CNT-DATE | Setting of the date and time to start sending counter information to the server Set the date and time to start sending counter information to the server using the E-RDS third-party extended function. Refer to the date and time setting in the user mode. (12 digits: YYYYMMDDHHMM) YYYY: Year, MM: Month, DD: Day, HH: Hour, MM: Minute) Setting range: 2000/1/1 00:00 to 2037/12/31 23.59 [Factory setting value/Value after RAM clearing: 000000000000] |
CNT-INTV | Setting of the interval for sending counter information to the server Set the interval of sending counter information to the server using the E-RDS third-party extended function. Setting range: 1 to 168 (Unit: 1 week) [Factory setting value/Value after RAM clearing: 24] |
STRD-POS | Automatic detection of the DF stream reading CCD reading position Execute this item after performing any of the replacement of the ADF unit, replacement of the reader unit, or RAM clearing for the scanner. [Operation] Å@The reading position is adjusted while the scanner continues to move by 0.1 mm. [Time] Å@When the lamp lights up: Adjustment time: 10 sec When the lamp does not light up: Lamp adjustment time of 10 to 30 sec + Adjustment time of 10 sec [Displays] 0: Operating / 1: OK / 2: NG |