-
Catalog
-
Sign In
-
Contacts
-
Forum
-
Eng
Canon MF9170c
Service Mode. TESTMODE 1
SYSTEM
DRAM
TESTMODE > SYSTEM > DRAM |
Check DRAM |
Sub item |
Description |
TEST1 |
Check writing/reading of data in DRAM area (excluding system work area) |
TEST2 |
Check data reading (high speed) |
ACC
TESTMODE > SYSTEM > ACC |
Check ID control card reader |
Sub item |
Description |
NCR-CRD |
Display: presence/absence of NCR device or the card |
CRD-KIND |
Card type (the first 3-digit characters) |
CRD-STYL |
Card format (the second 3-digit characters) |
READ-STS |
Read status (the third 3/2-digit characters) |
NCR-STS |
Device status (the fourth character) |
NCR-VER |
Version of NCR device (4-digit numeric figures) |
SPEAKER
TESTMODE > SYSTEM > SPEAKER |
Check SPEAKER |
Sub item |
Description |
ON |
When "ON" is selected, increase the volume step by step from the minimum up to maximum whenever OK key is pressed. When reaching the maximum volume, it goes back to the minimum volume through silent state. |
MIN |
When "MIN" is selected, set off the minimum volume with OK key. |
MAX |
When "MAX" is selected, set off the maximum volume with OK key. |
VOL |
Set off the volume according to the hardware volume. |
SCAN
ADJUST
TESTMODE > SCAN > ADJUST |
Sub item |
Description |
WLVL-ADJ |
Correct white level in copyboard scanning and stream scanning to determine shading target. |
|
SCAN READ |
Start copyboard scanning operation to read white level of the document (original). |
|
FLOW SCAN READ |
Start stream scanning operation to read white level at stream scanning. |
|
KDT-DF1-R |
Display DT-DF1-R |
|
KDT-DF1-G |
Display DT-DF1-G |
|
KDT-DF1-B |
Display DT-DF1-B |
|
KDT-DF2-R |
Display DT-DF2-R |
|
KDT-DF2-G |
Display DT-DF2-G |
|
KDT-DF2-B |
Display DT-DF2-B |
ADF-ADJ |
Execute adjustment of ADF |
|
DF-STRM |
Not used |
|
DF-SPEED |
Not used |
|
DF-OFFST |
Not used |
|
DF-POSAD |
Not used |