PrintCopy.info service

Canon MF9170c

Service Mode. COPIER. FUNCTION 2 CLEAR, MISC-R, MISC-P

CLEAR

COPIER > FUNCTION > CLEAR
Sub item Description
R-CON Not used
TEL-USER Clearing of user data and data registered in the address book
SSSW is not cleared.
SRVC-DAT Clearing of SERVICE DATA
User data is not cleared.
COUNTER Clearing of the maintenance/parts counter and mode counter to 0
Clear the counter (numerator) on the system dump list to 0.
TYPE   Initialization of USER DATA and SERVICE DATA for the specified destination setting
Japan: JAPAN
USA: U.S.A.
Europe: EUROPE 1(area) / U.K. / SWEDEN / SWISS / AUSTRIA / DENMARK / NORWAY / HOLLAND / BERUGIUM / FINLAND / ITALY / SPAIN / PORTUGAL / IRELAND / HUNGARY / SAF / GERMANY / FRANCE / CZECH / SLOVENIA / PORLAND / GREECE/ LUXEMBOURG / RUSSIA / EUROPE 2(area)
Australia: AUSTRALIA / N.Z.
China: CHINA
Korea: KOREA
Taiwan: TAIWAN
Asia: SINGAPORE / HONG KONG / MALAYSIA / ASIA(area)
    Note) STANDARD / CANADA are not in use.
HIST ACT-HIST Clearing of the communication management history
  ACC-HIST Clearing of the print history
  JAM-HIST Clearing of the jam history
  ERR-HIST Clearing of the error (E code) history
  ALARM Not used
  ENV-HIST Not used
CARD Clearing of the connection information of a new card reader equipment
Clear data related to card IDs (department).
Operation method
  1. Set the department management in user registration to OFF.
  2. Execute this item.
  3. Execute COPIER>FUNCTION>CLEAR>ERR>E719.
  4. Turn off the main power switch.
  5. Remove the control card equipment.
  6. Turn on the main power switch.
ERR E355-CLR Not used
E719-CLR Clearing of E719
Clear the connection information of the control card equipment and coin robo.
PWD-CLR Clearing of the password of a system administrator
FILE-SYS Initialization of the file system for the main and optional ROMs (File decompression)
FORMAT FMT-USB Not used
FMT-LDRV Not used
FMT-SD Not used
CER-DRV Format the /APL GEN directory of the NAND file system.
FMT-LANG Format the /BOOTDEV directory of the NAND file system.
512 Not used
1024 Not used
2048 Not used
CA-KEY Initialization of the CA certificate installed (Only displayed after the activation of e-RDS function)
ERDS-DAT Initialization of e-RDS parameters (Only displayed after the activation of e-RDS function)
  1. ERDS SWITCH
  2. RGW-ADDRESS
  3. RGW-PORT
  4. CNT-DATE
  5. CNT-INTV
  6. COM-LOG
DEPT-USR Setting the ID management by department and user management to OFF
SYS-INFO Clearing of the system administration password
ALL Clearing of the following items
  1. USER DATA
  2. SERVICE DATA
  3. JOB ID
  4. Histories
  5. Clearing date
MEMO:
USER DATA/SERVICE DATA are initialized for the default destination setting.
EAM-DAT Not used
ELA-DAT Not used

MISC-R

COPIER > FUNCTION > MISC-R
Sub item Description
SCANLAMP Turning on the scanning lamp

MISC-P

COPIER > FUNCTION > MISC-P
Sub item Description
MISC-SW Not used
MISC-NUM Not used
OUTPUT SRVC-DAT Output of the system data list/system dump list
  SYS-DAT Output of the system data list
Mainly output the report of each service software switch and parameter used for FAX function.
  SYS-DMP Output of the system dump list
Output the service data such as the number of communication, number of received sheets, number of sent sheets, number of recording sheets, and number of errors, etc.
  CNTR Output of the counter report
Display the counter indicating how often the function of reading, recording, communication, and copy operation is performed.
  ERR-LOG Output of error logs
  SPEC Output of the spec report
Print the current equipment condition.
  ERDS-COM Output of e-RDS communication error logs
  SRVC-LBL Output of the service level print
Error Code
Service Mode, Troubleshooting
Parts Catalog
Downloads Files
Home
New Register Forgot Password?
Send message to us