Canon MF6180dw
Service Mode. COPIER. DISPLAY
VERSION
| COPIER > DISPLAY > VERSION | ||
|---|---|---|
| MAIN | Display of MAIN (main program) version | |
| Details | To display the firmware version of Main Controller PCB. | |
| Use case | When upgrading the firmware | |
| Adj/set/operate method | N/A (Display only) | |
| Display/adj/set range | 00.00 to 99.99 | |
| Default value | 0 | |
| BOOT | Boot ROM version | |
| Details | To display the version of Boot ROM (BOOT program). | |
| Use case | When upgrading the firmware | |
| Adj/set/operate method | N/A (Display only) | |
| Display/adj/set range | 00.01 to 99.99 | |
| Default value | 0 | |
| LANG | Language pack version | |
| Details | To display the version of language pack. | |
| Use case | When upgrading the firmware | |
| Adj/set/operate method | N/A (Display only) | |
| Display/adj/set range | 00.00 to 99.99 | |
| Default value | 0 | |
| DEMODATA | Demo print data version | |
| Details | To display the version of demo print data. Since this machine does not have demo print function, "FF.FF" is displayed. |
|
| Use case | When upgrading the firmware | |
| Adj/set/operate method | N/A (Display only) | |
| Display/adj/set range | 00.00 to 99.99 | |
| Default value | 0 | |
| ECONT | ECONT version | |
| Details | To display the version of Engine Controller PCB. | |
| Use case | When upgrading the firmware | |
| Adj/set/operate method | N/A (Display only) | |
| Display/adj/set range | 00.00 to 99.99 | |
| Default value | 0 | |
| PANEL | PANEL version | |
| Details | To display the version of PANEL. | |
| Use case | When upgrading the firmware | |
| Adj/set/operate method | N/A (Display only) | |
| Display/adj/set range | 00.00 to 99.99 | |
| Default value | 0 | |
| Related service mode | COPIER> FUNCTION> SYSTEM> PANEL-UP | |
| BKUP | BKUP version | |
| Details | To display the version of BKUP. | |
| Use case | When upgrading the firmware | |
| Adj/set/operate method | N/A (Display only) | |
| Display/adj/set range | 00.00 to 99.99 | |
| Default value | 0 | |
| Related service mode | COPIER> FUNCTION> SYSTEM> BKUP-UP | |
ERR
Error code display screen
Up to 10 E codes and detailed codes for system errors can be shown.
JAM
Jam code display screen
Up to 10 Jam codes and detailed codes for system errors can be shown.
CCD
| COPIER > DISPLAY > CCD | ||
|---|---|---|
| TARGET-B | Shading target value (B) | |
| Details | To display the shading target value of Blue. Continuous display of 128 (minimum) or 384 (maximum) is considered a failure of the CIS Unit. |
|
| Use case | At scanned image failure | |
| Adj/set/operate method | N/A (Display only) | |
| Display/adj/set range | 128 to 384 | |
| Default value | 269 | |
| Related service mode | COPIER> ADJUST> CCD> DFTAR-B | |
| TARGET-G | Shading target value (G) | |
| Details | To display the shading target value of Green. Continuous display of 128 (minimum) or 384 (maximum) is considered a failure of the CIS Unit. |
|
| Use case | At scanned image failure | |
| Adj/set/operate method | N/A (Display only) | |
| Display/adj/set range | 128 to 384 | |
| Default value | 270 | |
| Related service mode | COPIER> ADJUST> CCD> DFTAR-G | |
| TARGET-R | Shading target value (R) | |
| Details | To display the shading target value of Red. Continuous display of 128 (minimum) or 384 (maximum) is considered a failure of the CIS Unit. |
|
| Use case | At scanned image failure | |
| Adj/set/operate method | N/A (Display only) | |
| Display/adj/set range | 128 to 384 | |
| Default value | 263 | |
| Related service mode | COPIER> ADJUST> CCD> DFTAR-R | |
| TARGETBW | Shading target value (B&W) | |
| Details | To display the shading target value at B&W jobs. Continuous display of 128 (minimum) or 384 (maximum) is considered a failure of the Main Controller PCB. |
|
| Use case | At scanned image failure | |
| Adj/set/operate method | N/A (Display only) | |
| Display/adj/set range | 128 to 384 | |
| Default value | 276 | |
| Related service mode | COPIER> ADJUST> CCD> DFTAR-BW | |