Canon MF6180dw
Adjustment. After Replacing. Reader Upper Cover Unit
1) Enter the values of the label affixed at the upper left of the glass in the following service mode item, and write the values in the service label.
- COPIER > ADJUST > CCD > W-PLT-X (standard White Plate X signal data)
- COPIER > ADJUST > CCD > W-PLT-Y (standard White Plate Y signal data)
- COPIER > ADJUST > CCD > W-PLT-Z (standard White Plate Z signal data)
2) Place a blank paper on the Copyboard Glass, and execute white level adjustment in the following service mode.
- COPIER > FUNCTION > CCD > DF-WLVL1 (white level adjustment [copyboard scan])
- COPIER > FUNCTION > CCD > DF-WLVL3 (white level adjustment B&W [copyboard scan])
Next, place the same blank paper on the DF and execute the following service mode.
- COPIER > FUNCTION > CCD > DF-WLVL2 (white level adjustment [DF scan])
- COPIER > FUNCTION > CCD > DF-WLVL4 (white level adjustment B&W [DF scan])
If it results in NG, execute it again after turning OFF and then ON the power.