Canon MF6180dw

Service Mode Menu

• COPIER
  Service mode for copier
  • DISPLAY
    State display mode
  • I/O
    I/O display mode
  • ADJUST
    Adjustment mode
  • FUNCTION
    Operation / inspection mode
  • OPTION
    Specification setting mode
  • COUNTER
    Counter mode
• FEEDER
  ADF service mode
  • ADJUST
    Adjustment mode
  • FUNCTION
    Operation / inspection mode
• FAX
  FAX service mode
  • SSSW
    Bit switch registration mode
  • MENU
    Menu switch registration mode
  • NUM
    Numeric parameter setting mode
  • NCU
    NCU parameter setting mode (Service adjustment is not available)
• TESTMODE
  Service mode for test print, operation check, etc.
  • PRINT
    Print test mode
  • FAX
    FAX test mode

Backing up Service Mode

Each device is tuned at the time of shipment and the tuned values are written on the service label.

However, when replacing the main controller PCBs / DC controller PCBs or clearing RAM, tuned ADJUST and OPTION values are reset to defaults. Each service technician should adjust these values in field and ensure to write values after changes in the service label. If the corresponding item is not found on the service label, enter the value in the blank space.