Canon MF411dw
Service Mode. COPIER. DISPLAY
VERSION
COPIER > DISPLAY > VERSION
MAIN | Display of MAIN (main program) version |
---|---|
Detail | To display the firmware version of Main Controller PCB. |
Use Case | When upgrading the firmware |
Adj/Set/Operate Method | N/A (Display only) |
Display/Adj/Set Range | 00.00 to 99.99 |
BOOT | Boot ROM version |
Detail | To display the version of Boot ROM (BOOT program). |
Use Case | When upgrading the firmware |
Adj/Set/Operate Method | N/A (Display only) |
Display/Adj/Set Range | 00.01 to 99.99 |
LANG | Language pack version |
Detail | To display the version of language pack. |
Use Case | When upgrading the firmware |
Adj/Set/Operate Method | N/A (Display only) |
Display/Adj/Set Range | 00.00 to 99.99 |
DEMODATA | Demo print data version |
Detail | To display the version of demo print data. Since this machine does not have demo print function, "FF.FF"is displayed. |
Use Case | When upgrading the firmware |
Adj/Set/Operate Method | N/A (Display only) |
Display/Adj/Set Range | 00.01 to 99.99 |
ECONT | ECONT version |
Detail | To display the version of Engine Controller PCB. |
Use Case | When upgrading the firmware |
Adj/Set/Operate Method | N/A (Display only) |
Display/Adj/Set Range | 00.01 to 99.99 |
PANEL | Dspl of Control Panel CPU PCB ROM ver |
Detail | To display the ROM version of Control Panel CPU PCB. |
Use Case | When upgrading the firmware |
Adj/Set/Operate Method | N/A (Display only) |
Display/Adj/Set Range | 00.00 to 99.99 |
Related Service Mode | COPIER > FUNCTION > SYSTEM > PANEL-UP |
USER
COPIER > DISPLAY > USER
SPDTYPE | To display the engine speed type (ppm) of Controller Board. |
---|---|
Detail | To display the engine speed type (ppm) of Controller Board. |
Use Case | When checking the engine speed type |
Adj/Set/Operate Method | None (display only) |
Display/Adj/Set Range | 00 to 99 |
CCD
COPIER > DISPLAY > CCD
TARGET-B | Shading target value (B) |
---|---|
Detail | To display the shading target value of Blue. Continuous display of 0 (minimum) or 2048 (maximum) is considered a failure of the CIS Unit. |
Use Case | At scanned image failure |
Adj/Set/Operate Method Display/Adj/Set Range Default Value | N/A (Display only) 0 to 2048 1202 |
Related Service Mode | COPIER > ADJUST > CCD > DFTAR-B |
TARGET-G | Shading target value (G) |
Detail | To display the shading target value of Green. Continuous display of 0 (minimum) or 2048 (maximum) is considered a failure of the CIS Unit. |
Use Case | At scanned image failure |
Adj/Set/Operate Method Display/Adj/Set Range Default Value | N/A (Display only) 0 to 2048 1163 |
Related Service Mode | COPIER > ADJUST > CCD > DFTAR-G |
TARGET-R | Shading target value (R) |
Detail | To display the shading target value of Red. Continuous display of 0 (minimum) or 2048 (maximum) is considered a failure of the CIS Unit. |
Use Case | At scanned image failure |
Adj/Set/Operate Method Display/Adj/Set Range Default Value | N/A (Display only) 0 to 2048 1135 |
Related Service Mode | COPIER > ADJUST > CCD > DFTAR-R |
TARGETBW | Shading target value (BW) |
Detail | To display the shading target value at B&W jobs. Continuous display of 0 (minimum) or 2048 (maximum) is considered a failure of the Main Controller PCB. |
Use Case | At scanned image failure |
Adj/Set/Operate Method Display/Adj/Set Range Default Value | N/A (Display only) 0 to 2048 1072 |
Related Service Mode | COPIER > ADJUST > CCD > DFTAR-BW |
ERR
Error code display screen
Up to 20 E codes and detailed codes for system errors can be shown.
JAM
Jam code display screen
Up to 20 Jam codes and detailed codes for system errors can be shown.