Canon MF244dw
Service Mode. COPIER. ADJUST
ADJ-XY
COPIER > ADJUST > ADJ-XY | |||
---|---|---|---|
Sub item | Description | ADF model |
Other |
ADJ-X | Adjustment value of image reading start position (Horizontal scanning direction) (X direction) [Applicable case] When the reading position of vertical scanning direction in fixed reading is incorrect [Adjustment]
|
Yes | Yes |
STRD-POS | Adjusting reading position in DF stream reading [Applicable case] When the reading position of vertical scanning direction in DF stream reading is incorrect [Adjustment]
|
Yes | No |
ADJ-X-MG | Fine adjustment (0.1% precision) of magnification ratio in Horizontal scanning di- rection in copyboard reading ±3% [Applicable case] When copy output image is larger or smaller than original image [Adjustment] Adjust by comparing the copy output and original.
[Factory default settings/ Value after RAM clear] 0 [Caution] This adjustment is targeted to adjust the image position on copy output. This may affect to the image of SCAN. |
Yes | Yes |
CCD
COPIER > ADJUST > CCD | |||
---|---|---|---|
Sub item | Description | ADF model |
Other |
W-PLT-X | Standard White Plate X signal data Setting range: 7000 to 9999 (Default value: 8493) |
Yes | Yes |
W-PLT-Y | Standard White Plate Y signal data Setting range: 7000 to 9999 (Default value: 8988) |
Yes | Yes |
W-PLT-Z | Standard White Plate Z signal data Setting range: 7000 to 9999 (Default value: 9176) |
Yes | Yes |
FBTAR-R | Shading target value for RED in copyboard reading Setting range: 128 ~ 384 [Value after RAM clear: 290] |
Yes | Yes |
FBTAR-G | Shading target value for GREEN in copyboard reading Setting range: 128 ~ 384 [Value after RAM clear: 284] |
Yes | Yes |
FBTAR-B | Shading target value for BLUE in copyboard reading Setting range: 128 ~ 384 [Value after RAM clear: 278] |
Yes | Yes |
FBTAR-BW | Shading target value in copyboard black and white reading Setting range: 128 ~ 384 [Value after RAM clear: 301] |
Yes | Yes |
DFTAR-R | Shading target value for RED in DF reading Setting range: 128 ~ 384 [Value after RAM clear: 334] |
Yes | No |
DFTAR-G | Shading target value for GREEN in DF reading Setting range: 128 ~ 384 [Value after RAM clear: 323] |
Yes | No |
DFTAR-B | Shading target value for BLUE in DF reading Setting range: 128 ~ 384 [Value after RAM clear: 318] |
Yes | No |
DFTAR-BW | Shading target value in black and white reading Setting range: 128 ~ 384 [Value after RAM clear: 341] |
Yes | No |
PANEL
COPIER > ADJUST > PANEL | |||
---|---|---|---|
Sub item | Description | Touch Panel models | Other |
TOUCHCHK | To adjust the coordinate on the Touch Panel. | Yes | No |