Brother MFC9330CDW
Troubleshooting. 2.8.2 Paper jam at center of transport section
User Check
- Turn the orientation of the papers loaded in the paper tray by 180°.
- Shuffle the papers loaded in the paper tray and set them in the tray again.
- Check if the thickness of the paper is 60 to 105 g/m2. (60 to 163 g/m2 for manual feed slot.)
- Check that the belt unit is properly set.
- Check if a label sticks to a roller or the paper transport section.
Step | Cause | Remedy |
---|---|---|
1 | Foreign object inside machine | Remove foreign object. Check if a label sticks to the side or underside of a part. |
2 | Eject actuator that has come off or that has been caught | Re-assemble the eject actuator. |
3 | Fuser cover installation failure | Re-assemble the fuser cover. |
4 | Eject sensor PCB harness connection failure | Check the eject sensor PCB harness connection and reconnect it. |
5 | Fuser cover failure | Replace the fuser cover. |
6 | Eject sensor failure | Replace the eject sensor PCB ASSY. |
7 | Fuser unit failure | Replace the fuser unit. |
8 | Main PCB failure | Replace the main PCB ASSY. |