Brother MFC5895CN
Troubleshooting. Image Defect 4
Image Defects
| Problem | Action to be taken |
|---|---|
| (10)White horizontal streaks | • Perform the purge operation (Function code 76) several times to remove dust or air bubbles from its nozzles. • Replace the head/carriage unit. • Check the paper feed-related rollers. • Perform the print head skew compensation with the head skew adjuster knob. • Clean the head caps and wiper of the maintenance unit with a Rubycel stick. For the cleaning procedure, refer to "CLEANING THE MAINTENANCE UNIT." |
| (11)Stained leading edge of recording paper | Printer • Perform a head cleaning operation. • Check that the head/carriage unit is set into place. • Check the height adjustment mechanism of the head/carriage unit • If the "head-platen gap offset" is enabled with assurance mode switch AMS 02 (Function code 88), align the vertical print lines (Function code 65). |
| (12)Overlapping or separated lines over the whole page | • Adjust the paper feeding correction value of the paper feed roller with Function code 58 in the maintenance mode. • Perform the print head skew compensation with the head skew adjuster knob. |
| (13)Overlapping or separated lines at the trailing edge of the recording paper | • Adjust the paper feeding correction value of the paper ejection roller with Function code 58 in the maintenance mode. |