Brother MFC5895CN
Maintenance Mode 2. Functions List
Function Code | Function |
---|---|
01 | EEPROM Parameter Initialization |
05 | Printout of Scanning Compensation Data |
08 | ADF Performance Test |
09 | Test Pattern |
10 * | Firmware Switch Setting |
11 * | Printout of Firmware Switch Data |
12 * | Operational Check of LCD and Specifying of the LCD Type |
13 | Operational Check of Control Panel PCB (Check of Keys) |
28 | Updating of Firmware Using an External Memory |
32 | Sensor Operational Check |
46 | Backup of Machine Information |
52 * | Setting of Country/Language (User-accessible) |
53 * | Transfer of Received FAX Data and/or Equipment's Log |
54 | Fine Adjustment of Scanning Start/End Position |
55 | Acquisition of White Level Data and CIS Scanner Area Setting |
58 | Updating of Paper Feeding Correction Value |
59 | Checking of CIS Travel and Specifying of CIS Type |
63 | Travel Check of the Head/Carriage Unit and Initial Setup Mode |
65 | Alignment of Vertical Print Lines in Monochrome |
66 * | Margin Adjustment in Borderless Printing |
68 | Updating of Property Data |
69 | Head/Carriage Unit Traveling Speed Check |
74 | EEPROM Customizing |
75 * | Travel of Head/Carriage Unit (for removing paper particles and dust accumulated on the maintenance unit) |
76 * | Purge Operation |
80 * | Display of the Equipment's Log |
82 * | Equipment Error Code Indication |
87 * | Output of Transmission Log to the Telephone Line |
88 * | Assurance Mode Switch Setting |
91 | EEPROM Parameter Initialization (except the telephone number storage area) |
99 | Exit from the Maintenance Mode |
(Menu + #, 2, 7, 9, 0, 0) | Cancellation of the Pin TX Lock Mode (Not applicable to Japanese and U.S.A. models) |
* A function that the end user can use.