Brother MFC-L8900CDW
Maintenance Mode 2. Functions List
| Function code | Function |
|---|---|
| 01 | Initialize EEPROM parameters |
| 03 | Transition to shipping state |
| 08 | ADF performance test |
| 09 | Print quality test pattern |
| 10 | Set worker switches (WSW) |
| 11 | Print worker switch (WSW) setting data |
| 12 | Check LCD operation |
| 13 | Check control panel key operation |
| 18 | Save the NetConfig information |
| 25 | Display software version |
| 32 | Check sensor operation |
| 33 | Display LAN connection status |
| 43 | Set PC print functions |
| 45 | Change USB No. return value / Switching Dither Pattern / Change ON/OFF setting of Direct Print Color mode- Improve Gray Color / Switching of timing to execute Auto Registration / Adjust left-end print position / Adjust upper- end print position / Change of the transfer current setting / Change of ghost reduction setting |
| 46 | Adjust printable range for each speed level |
| 53 | Transfer received fax data / log information (fax models only) |
| 54 | Fine-tune scanning position |
| 55 | Acquire white level data and set CIS scan area |
| 61 | Adjust touch panel |
| 66 | Adjustment of color registration (Adjustment of inter-color position alignment) |
| 67 | Continuous print test |
| 68 | Laser unit test pattern print |
| 69 | Print frame pattern (single-side printing) |
| 70 | Print frame pattern (duplex printing) |
| 71 | Color test pattern |
| 72 | Sensitivity adjustment of density sensor |
| 73 | Continuous adjustments of density / registration sensor |
| 74 | Configure for country / region and model |
| 77 | Print maintenance information |
| 78 | Check fan operation |
| 79 | Delete fax data |
| 80 | Display machine log information |
| 82 | Display machine error code |
| 83 | Developing bias voltage correction |
| 87 | Send communication log information to telephone line |
| 88 | Reset counters for consumable parts |
| 91 | Initialize EEPROM parameters |
| 99 | Quit maintenance mode |