Brother HL3190CDW
Maintenance Mode 2. Functions List
Function code | Function |
---|---|
01 | Initialize EEPROM parameters |
03 | Transition to shipping state |
09 * | Monochrome print quality test pattern |
10 * | Set worker switches (WSW) |
11 * | Print worker switch (WSW) setting data |
12 * | Check LCD operation |
13 | Check control panel key operation |
25 * | Display software version |
32 | Check sensor operation |
33 | Display LAN connection status |
45 * | Change USB No. return value / Switching dither pattern / Switching of timing to execute auto registration / Adjust left-end print position / Adjust upper-end print position / Change of the transfer current setting / Change of ghost reduction setting / Change of function switch / Change of drum developing bias correction value in endurance deterioration of drum / Switching of black toner discharge compensation |
46 | Adjust printable range for each speed level |
57 | Check consumables function |
61 * | Adjust touch panel |
66 * | Adjustment of color registration (Adjustment of inter-color position alignment) |
67 | Continuous print test |
68 * | LED ASSY test pattern print |
69 | Print frame pattern (1-sided printing) |
70 | Print frame pattern (2-sided printing) |
71 * | Color test pattern |
72 * | Sensitivity adjustment of density sensor |
73 | Continuous adjustments of density / registration sensor |
74 | Configure for country / region and model |
77 * | Print maintenance information |
78 | Check fan operation |
80 * | Display machine log information |
82 * | Display machine error code |
83 | Developing bias voltage correction |
88 | Reset counters for consumable parts |
91 * | Initialize EEPROM parameters |
99 | Quit maintenance mode |
* The maintenance mode functions shaded in the table can be used by end users.