Brother HL3180CDW

User Check

- Turn the orientation of the papers loaded in the paper tray by 180°.
- Check if the thickness of the paper is 60 to 105 g/m2. (60 to 163 g/m2 for manual feed slot.)
- Check if a label sticks to a roller or the paper transport section.

Step	Cause	Remedy
1	Foreign object at the back of the machine	Remove foreign object. Check if a label sticks to the side or underside of a part.
2	Eject actuator catching on some position	Re-assemble the eject actuator.
3	Fuser cover installation failure	Re-assemble the fuser cover.
4	Back cover installation failure	Re-assemble the back cover.
5	Eject sensor PCB harness connection failure	Check the eject sensor PCB harness connection and reconnect it.
6	Back cover failure	Replace the back cover.
7	Eject roller 1 failure	Replace the fuser cover.
8	Eject sensor failure	Replace the eject sensor PCB ASSY.
9	Main PCB failure	Replace the main PCB ASSY.