Brother HL3180CDW

User Check

- Turn the orientation of the papers loaded in the paper tray by 180°.
- Shuffle the papers loaded in the paper tray and set them in the tray again.
- Check if the thickness of the paper is 60 to 105 g/m2. (60 to 163 g/m2 for manual feed slot.)
- Check that the belt unit is properly set.
- Check if a label sticks to a roller or the paper transport section.

Step	Cause	Remedy
1	Foreign object inside machine	Remove foreign object. Check if a label sticks to the side or underside of a part.
2	Eject actuator that has come off or that has been caught	Re-assemble the eject actuator.
3	Fuser cover installation failure	Re-assemble the fuser cover.
4	Eject sensor PCB harness connection failure	Check the eject sensor PCB harness connection and reconnect it.
5	Fuser cover failure	Replace the fuser cover.
6	Eject sensor failure	Replace the eject sensor PCB ASSY.
7	Fuser unit failure	Replace the fuser unit.
8	Main PCB failure	Replace the main PCB ASSY.