Brother HL3180CDW
Troubleshooting. 2.7 Unable to perform 2-sided printing
User Check
- Firmly close the back cover.
- Firmly install the paper tray.
- Set driver to 2-sided printing.
- Use the paper equal to or larger than Letter size or A4 size. (Use paper specified in each country setting.)
| Step | Cause | Remedy |
|---|---|---|
| 1 | Eject actuator catching on some position | Re-assemble the eject actuator. |
| 2 | Back cover failure | Replace the back cover. |
| 3 | Duplex tray failure | Replace the duplex tray. |
| 4 | Back cover sensor failure | Replace the back cover sensor harness ASSY. |