Brother HL3180CDW
Troubleshooting. 2.2 No paper feeding from the manual feed slot
User Check
- Check if the paper is loaded into the manual feed slot correctly.
- Check that multiple sheets of paper are not loaded in the manual feed slot.
- Check if the thickness of the paper is 60 to 163 g/m2.
- Check whether a paper tray is selected mistakenly as the setting of printer driver.
| Step | Cause | Remedy |
|---|---|---|
| 1 | Coming off of manual feed actuator. | Re-assemble the manual feed actuator. |
| 2 | Main motor harness connection failure | Check the main motor harness connection and reconnect it. |
| 3 | Registration front/rear/manual feed sensor PCB harness connection failure | Check the registration front/rear/manual feed sensor PCB harness connection and reconnect it. |
| 4 | Registration clutch failure | Replace the registration clutch. |
| 5 | Paper feed unit failure | Replace the paper feed unit. |
| 6 | Main motor failure | Replace the process drive unit. |
| 7 | Low-voltage power supply PCB failure | Replace the low-voltage power supply PCB ASSY. |
| 8 | Main PCB failure | Replace the main PCB ASSY. |