Brother HL3180CDW

Function code	Function
01	EEPROM parameter initialization
05	Printout of scanning compensation data
06	Placement of CIS unit in position for transportation
08	ADF performance test
09	Monochrome image quality test pattern
10	Worker switch (WSW) setting
11	Printout of worker switch (WSW) data
12	Operation check of LCD
13	Operational check of control panel key
25	Software version check
32	Operational check of sensors
33	LAN connection status display
41	Backup of machine information
43	PC print function setting
45	Changing return value of USB No./Switching Dither Pattern/ Switching of ON/OFF of DirectPrint Color mode-Improve Gray Color/Switching of timing to execute Auto Registration/ Adjusting left-end print start position on second side in duplex printing (2-sided printing model only)
52	Set country/language
53	Transfer of received fax data and log information
54	Fine adjustment of scan positions
55	Acquisition of white level data and setting of CIS scanning area
57	Motor reset
61	Adjustment of touch panel
66	Adjustment of color registration (Adjustment of inter-color position alignment)
67	Print test
68	LED test pattern print
69	Frame pattern print (One-sided)
70	Frame pattern print (Two-sided)
71	Color test pattern
72	Sensitivity adjustment of density sensor
73	Continuous adjustments of density and registration sensor
74	Setting by country
77	Printout of maintenance information
78	Operational check of fans
80	Display of device log information
82	Display of device error codes
83	Developing bias voltage correction
87	Sending of communication log information to telephone line
88	Counter reset after fuser unit/PF kit 1 replacement
91	EEPROM parameter initialization
95	Function unnecessary for maintenance work
99	Exit from the maintenance mode

* The functions shaded in the table above are user-accessible.