Brother HL-L3290CDW

The user setting information for the machine is stored in the main PCB. You can return this to the default settings by following the procedure below.

Operating Procedure

HL-L3290CDW/DCP-L3551CDW (For models without touch panel)

1. Press the [Menu].
2. Press the [▲] or [▼] to display the “Initial Setup” option, and then press the [OK].
3. Press the [▲] or [▼] to display the “Reset” option, and then press the [OK].
4. Press the [▲] or [▼] to choose the type of Factory Reset you want to perform, and then press the [OK].
   Note: Subdivided reset functions are not available for some models.
5. Press the option in the table to reset the machine or to exit the process. The LCD displays “Reboot OK?”.
6. Press the option in the table to reboot the machine or to exit the process.
   Note: If you do not reboot your machine, the reset process will not finish and your settings will remain unchanged.

MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW (For models with touch panel)

1. Press the [Settings] > [All Settings] > [Initial Setup] > [Reset] > [Factory Reset].
2. Swipe up or down or press the [▲] or [▼] to display the type of reset functions, and then press the reset function you want to use.
   Note:
• The network settings, the security settings and address book data will not be reset by the “Machine Reset”.
• If you discard or transfer the machine, we recommend accomplishment of the “Factory Reset” to erase the personal data in the machine.
3. “Machine will reboot after resetting. Press [OK] for 2 seconds to confirm.” appears. Press the [OK] for two seconds to confirm.
   Note: You can also reset the Network settings by pressing the [Settings] > [All Settings] > [Network] > [Network Reset].
   The machine will restart.