Brother HL-L2386DW
Troubleshooting. 2.9.3 Paper jam at the manual feed slot
User Check
• Check that the paper is set in the manual feed slot correctly.
• Flip over the paper in the manual feed slot or rotate the paper 180°.
• Adjust the paper guide according to the paper size.
• Check that multiple sheets of paper are not set.
• Check that the thickness of the paper is 60 to 230 g/m2.
| Step | Cause | Remedy |
|---|---|---|
| 1 | Foreign object around the manual feed slot | Remove the foreign object. |
| 2 | Connection failure of the registration front/rear sensor harness | Reconnect the registration front/rear sensor harness. |
| 3 | T1 registration front actuator coming off | Reattach the T1 registration front actuator. |
| 4 | Connection failure of the registration clutch harness | Reconnect the registration clutch harness. |
| 5 | Registration front/rear sensor failure | Replace the actuator holder ASSY. |
| 6 | Paper feed motor failure | Replace the paper feed motor. |
| 7 | High-voltage power supply PCB failure | Replace the high-voltage power supply PCB ASSY. |
| 8 | Damaged gears in the paper feed drive system | Replace the frame L unit. |
| 9 | Fuser unit failure | Replace the fuser unit. |
| 10 | Main PCB failure | Replace the main PCB ASSY. |