Brother HL-L2386DW

User Check

• Check that the paper is set in the MP tray correctly.
• Flip over the paper in the MP tray or rotate the paper 180°.
• Adjust each paper guide according to each paper size.
• Check that there is not too much paper set.
• Check that the thickness of the paper is 60 to 230 g/m2.
• Flip through the paper and reset it in the MP tray.

Step	Cause	Remedy
1	Foreign object around the MP tray	Remove the foreign object.
2	Connection failure of the MP paper empty/registration front sensor harness	Reconnect the MP paper empty/ registration front sensor harness.
3	MP registration front actuator coming off	Reattach the MP registration front actuator.
4	Connection failure of the registration clutch harness	Reconnect the registration clutch harness.
5	Paper feed motor failure	Replace the paper feed motor.
6	Damaged gears in the MP paper feed system	Replace the frame L unit.
7	Damaged fuser unit	Replace the fuser unit.
8	Main PCB failure	Replace the main PCB ASSY.