Brother HL-L2340DW

User Check

• Check that the paper is set in each paper tray correctly.
• Flip over the paper in each paper tray or rotate the paper 180°.
• Adjust each paper guide according to the paper size.
• Check that there is not too much paper set in the paper tray.
• Check that the thickness of the paper is 60 to 105g/m2. (60 to 163g/m2 for manual feed slot)
• Flip through the paper and reset it in the paper tray.

Step	Cause	Remedy
1	Foreign object in the back cover	Remove the foreign object.
2	Eject actuator coming off	Reattach the eject actuator.
3	Connection failure of the eject sensor PCB flat cable	Reconnect the eject sensor PCB flat cable.
4	Fuser cover attachment failure	Reattach the fuser cover.
5	Eject sensor failure	Replace the eject sensor PCB ASSY.
6	Damaged gears in the ejecting system	Replace the main frame L ASSY.
7	Fuser unit failure	Replace the fuser unit.
8	Main PCB failure	Replace the main PCB ASSY.