Brother DCP8110D

Maintenance mode is exclusively designed for checking, setting and adjusting the machine using the buttons on the control panel. Using maintenance mode functions, you can conduct operational checks of sensors or test printing, display the log information or error codes, and change the worker switches (WSW) etc.

Method of entering end-user accessible maintenance mode

Basically, the maintenance mode functions should only be accessed by service personnel. However, end users are allowed to use some of these functions under the guidance of service personnel over the phone. End users can only use the functions shaded in the table on the on page 5-2 (function codes 06, 09, 10, 11, 12, 25, 43, 45, 52, 53, 54, 61, 77, 80, 82, 87, 88 and 91).

Non touch panel models

1. While the machine is in the ready state, press the [Menu], [Start], and [Menu] buttons in this order. "0" is displayed on the LCD.
2. Use the keypad to enter the maintenance mode function code to be executed.
3. Each time the selected maintenance mode function is completed, the machine returns to the ready state automatically.

Touch panel models

1. While the machine is in the ready state, press the [Menu], [Start], and [0] buttons in this order. "0" is displayed on the LCD.
2. Use the keypad to enter the maintenance mode function code to be executed.
3. Each time the selected maintenance mode function is completed, the machine returns to the ready state automatically.

Method of entering maintenance mode for service personnel

Non touch panel models

1. While the machine is in the ready state, press the [Menu] and [Start] buttons in this order. Then, press the [▲] button four times to enter maintenance mode.
2. "■■ MAINTENANCE ■■■" is displayed on the LCD to indicate that the machine has moved into the initial state of
   maintenance mode. The machine is ready to accept entry via the buttons.
3. To select any of the maintenance mode functions shown in the list, use the keypad to enter the maintenance mode function code to be executed.

Touch panel models

1. While the machine is in the ready state, press the [Menu] and [*] buttons in this order. Then, press the [2], [8], [6], and [4] buttons in this order to enter maintenance mode.
2. "■■ MAINTENANCE ■■■" is displayed on the LCD to indicate that the machine has moved into the initial state of maintenance mode. The machine is ready to accept entry via the buttons.
3. To select any of the maintenance mode functions shown in the list, use the keypad to enter the maintenance mode function code to be executed.