Brother DCP1518

User Check

- Check that the USB cable is not damaged.
- When using an interface switch, check that the correct machine is selected.
- Check the relevant section in the User's Guide.
- Check the driver settings.
- Reset the machine to the default settings. (Refer to the User's Guide.)

Step	Cause	Remedy
1	Machine connection	For Macintosh, check the Product ID*. When it is wrong, update the firmware.
2	Main PCB failure	Replace the main PCB ASSY.

* Check the Product ID on a Macintosh according to the following procedure:

1. Select “About This Mac” from the “Apple” menu.
2. Press the “More Info...” button in the “About This Mac” dialog box.
3. Select “USB” at the bottom of “Hardware” in the “Content” on the left side of the screen.
4. Select “DCP-XXXX” or “MFC-XXXX” in the “USB Device Tree”.
5. Check the Product ID under “DCP-XXXX” or “MFC-XXXX”.

Product ID (hexadecimal)

• DCP-1510 : 02D0h
• MFC-1810 : 02D1h